SM25T
-
Posts
10,589 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by SM25T
-
Oops
-
What is it for ?
-
It's not just noise .... the whole car is buzzing !!
-
You can adjust the ride height at the rear. When I changed to 300lb front springs the rears were changed to 175lb linear springs. New one way adjustable dampers too.
-
Black nylon insect mesh from eBay supplier. Fill the complete roll bar. Much more effective than a thin strip between headrests
-
Does sound like cable adjustment nuts loose or cable fraying ?
-
In old money 👍
-
Use the bolt in the pipe to let air out when the front of the car is raised. By the way, the bobbin looks a bit perished ?
-
I got advice and my springs from ProComp Motorsport in Birmingham
-
I was advised that they must be mounted with the adjuster downwards when I bought mine.
-
Change to stiffer springs. 55mm without your weight is way too low. My SV was fitted with 170lb springs and I changed to 250, then 300 👍 the spring is much longer too.
-
I changed my front springs, initially to 250lb then up to 300lb. Smooths out the bumps and helps keep the sump off the ground. Check any ride heights with the equivalent of your weight in the car.
-
I recall Sigma having 110mm under the sump from new
-
Check it with the equivalent of your weight in the car.
-
The K-series pull type hydraulic clutch utilises the standard clutch fork. Simple swap
-
Do it all with the equivalent of your weight in the car.
-
I suffered two failed hydraulic slave cylinders before ditching the hydraulic system and fitting a clutch cable. No other parts required. Took about 20 minutes. So much nicer to use and easy to carry a spare cable.
-
There's no easy way to remove the dash 😀 .... mobile phone handy for looking behind it.
-
Crazy
-
Car spares shop. eBay. etc ... measure the diameter of the collar and see if slots or holes around the edge. Buy as required
-
Amps or volts ?
-
It's a heavy contact somewhere, as the NVH in this car is really harsh !
-
I suspect you'll find it didn't get changed when they started using the Mazda gearbox. This is Caterham.
-
I think it proved very beneficial, but leave it to the OP to comment.
