-
Posts
1,036 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Posts posted by richy
-
-
Anybody trailering their car? I note on the MSV website that all cars must be driven there?
Richy
-
Thanks Richard, I didn't know that. More info to add to the confusion!
Cheers,
Richy
-
Thanks for your responses.
Jez - interesting comment. Open diff as well. I don't want a boring car 😬.
Gary - thanks for the info. I'm out of country at the mo, so it won't be till early next year when I need them.
I've also been offered some part worn ACB10's.
Decisions decisions.
Richy
-
I have enough trouble seeing out of the rear window of the Seven's hood. Tinting would only make it worse 😬
Richy
-
Track day tyres only. Used up the tread on the old CR500's I bought 2nd hand last year. Any suggestions on what tyres I should put on next?
6 inch wheels all round. Sticky slicks? or blagging more old tyres off Blatchat?
125bhp Sigma.
Richy
-
Quoting billyboanerges:My master cylinder spills fluid if over-filled. I keep it at a level where the warning light just flashes under rapid acceleration, any more fluid and it leaks - maybe the cap.
Tony
Same here - at least the occasional flashinh warning light assures me it's working!
Richy
-
-
If this is for an S3 chassis, can I have the SBFS Tonneau please?
Richy
-
Much better now. Still a slight squeak occasionally when hot, but much improved.
7WotW: I'll see how I get on with the shims fitted before deciding whether to remove them.
Thanks for all the advice.
Richy
-
-
Thanks.
Noticed this morning they were very squeally (spelling?) after a few miles. Not just the odd small squeak, but very loud.
Have now fitted the rubber shims and applied copper-slip to the back. Will see how they are tomorrow, and I'll check the pedal feel as well.
On this morning's test drive, I managed to get one of the fronts locking up - which was very rare with the standard pads.
Richy
-
Just fitted these to the standard fronts. Included in the box were 4 self-adhesive rubber sheets. Anyone know what these are for?
Richy
-
Thought this might be a new variation on following hounds
-
OK, thanks.
Richy
-
So, where are the rack knuckles on that picture? Behind the top damper bolt?
Richy
-
Not done it, or heard of it - mine are drilled through the stays. Yours sounds like a very good idea.
Richy
-
Quoting Rampmonkey:
a black cylinder approximately 10cm long and 4cm diameter. Whenever I press the immobiliser key fob, it buzzes incessantly.
Are you sure it belongs to the car? 😬
-
Can't see the point on a car engine. Big stuff, then yes.
-
Depends on the grade of grit he uses, and the pressure.
-
Who named their chicken after a deep fat fryer? 😬
-
And? They have telephones there as well. 😬
-
-
Get a Sigma? 😬
-
I seem to remember you need to remove both sections of boot flooring to access the harness connector to the RHS brake light alongside the fuel tank.
Richy
Club Session at Oulton Park - Tuesday 16th October
in Track
Posted
That's me booked in. See you there.
Richy