-
Posts
932 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Posts posted by John Gaines
-
-
We have a number of record woodwork vices that are surplus to requirements, good quality.
Model 52a old ones £8
Model 52 mew model £15
Best to collect or use GONADS can deliver to East sussex or Kent meetings
John.
-
Thanks for the reply Alex. I have a Zetec fitted with a 7 inch silencer which is bigger than the one that was with the crossflow setup. This seems a lot of weight betwen the headers and the rear mount. I have seen cars with a front bracket and wondered if it was standard.
John.
-
I have a live axle chassis.I need to support the silencer at the front as well as the back, can anyone give the position on the extra exhaust mount hole that is under the skin at the front of the silencer? I am assuming that there is one there
Dimensions from the front or the rear mudguard would be fine.
Regards, John.
-
As the ad states, hood sticks from a live axle car, used once, good condition. £15 plus post or pick up from east sussex.
Regards, John.
-
Anthony YHM.
Regards, John.
-
I have a red bar sitting in the garage.
Will mail you.
Regards, John.
-
Can anyone give an indication as to expected milage from the Toyos? This would be for road use only.
Regards John.
-
Thanks Mike, I have since found my old one in the garage!
-
If this fits a live axle I will take it please Aves.
Regards, John
-
Doug, I run with a nippon denso from some small van placed on the inlet side of the engine. I may have some photos somewhere.
Regards, John.
-
Yes is the answer! You will need to remove the A frame bolt where it passes under the housing to allow the case to rotate. Dont forget to drain the oil before undoing all the diff nuts around the case.
Regards, John.
-
Just a quick question. Is the cam belt drive on the zetec crank keyed or does it rely on a taper?
Regards, John.
-
Going back to screen for the cold weather and my screenwash bottle has vanished.
Does anyone have one surplus, gathering dust?
Regards, John.
-
Does anyone have a part number for the screenwash bottle and pump from a '97 live axle? Was this used on another car?
Regards, John .
-
Can I dibs them please Steve, I will mail you on thurs morning,
regards, John.
-
I am interested Rob, where are you based?
Regards, John.
-
test
-
Not having the Mondeo manual, can anyone give information or links to cam belt change on a 2L Black top? Also best place to purchase kit.
Many thanks, John.
-
Mark YHM.
Regards, John.
-
Can anyone recomend a system and supplier for getting rid of the points / condenser on an M G Midget?
Regards, John.
-
I have tried cleaning Michelles Meganne soft top with one of the market cleaners without much luck. I cant remember the make but it was a well known brand. I was still left with green moss type areas and a rather blotchy hood. Has anyone found a good way to bring this type of material back to a clean look.
Regards, John.
-
Paul, if I have not heard from Nic by the end of the day I will mail you.
Regards, John.
-
Nic, can you let me know if you still want the Knex as I need the space. As It is for a good cause you can have it for £30! There is loads of it. Just let me know either way.
Regards, John.
-
I will take first dibs please Julian.
John.
OT Record woodwork vices
in For Sale
Posted
David, the 52a has a quick release lever and will be 30 years old, the 52 has no quick release but is not very old. New they are expensive!
http://www.tooled-up.com/Product.asp?PID=8122&Referrer=Froogle