-
Posts
932 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Posts posted by John Gaines
-
-
Dave, I will pass on this, we need a bit more boot space for the pram etc.
Thanks John
-
Dave, is this a four door? We have junior 2 arriving in april and we need some transport.
Regards, John
-
If this is suitable for a 1 year old can I take it please?
Thanks John.
-
-
I need to transport a cage from Leek Wootton, between Warwick & Kenilworth to the south east, preferably e sussex by september if possible
Regards John
-
thanks Bill, seems a shame to cut up a good one as I only need half, so I will pass over to Stuart.
-
BTT just in case someone has damaged one this season 😳
John.
-
Can I have first dibs on the tax disc holder?
Thanks, John
-
Vinnie, the part that I need is the front tube that connects to the chassis and over the wind screen, if possible with the two rear bars going back to the rear frame, but not the rear frame. This would be a rather large odd shaped parcel 😳
The front bar with the top tubes cut off about 30mm back would be ok. I am looking to fabricate an add on to my FIA bar, not for the track but for any deer etc round our country roads. The new bar would bolt on to the front of the chassis where the cage fits and clamp the FIA bar.
Let me know if you have any ideas.
Regards, John
-
-
Kevin, I contacted Bruce at Arch and it does not fit a live axle chassis, so pass on to you
John.
-
If this will fit a '97 live axle can I have first dibs please
John.
-
Bertie YHM.
John.
-
No it is a '97 live axle.
-
I have a zetec in my seven and the fit will be close but it does go.Have you the correct gearbox to bellhousing spacer? I think Phil Walters web site has a lot of images IIRC. Are you putting in an alloy bellhousing? this is a major weight saving on the cast iron boat anchor thing I think rally design supplies them.
Good luck, John Gaines
-
A bit of a long shot but I am looking for the front half of a cage for a project. I have a live axle car but as I only need the bar that runs from the dash over the screen a dedion one may fit.
Regards, John.
-
That's no problem, mail me your number and we can sort out a time to pick up.
Reards, John.
-
They are free .
I could get them down to shoreham over the next two weeks if that helps?
Regards, John.
-
From 1997 most copies present. Collect from Burwash Weald, East Sussex.
Regards, John.
-
Mrs G has a new car and needs to sell her soft top. The car has full service history, dymanique (pearlescent silver). 84K new cam belt, eletric hood, Viper alloys recent tyres, Y plate. All documents etc.
£3000. Photos available.
Regards, John
-
I have a crane in Burwash Weald E Sussex available to club members.
Engine stand as well
-
Thanks Tony forgot to add Zetec
Regards, John.
-
As the title says. I am looking for a good condition Raceline wet sump.
Thanks, John.
-
No problem, I have about 7 of the old ones and 6 of the new.
Regards, John.
Zetec engine mounts
in TechTalk
Posted
I noticed a club member's Raceline engine mounts were quite a bit more sturdy than my ones purchased from them in 2005. Was there a strength issue with the old design? Has anyone here had one fail?
Regards, John.