Pezky
-
Posts
2,500 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by Pezky
-
I think there is a place up the A5 north of Towcester "Johns Motors"? There also is/used to be a chap in Buckingham (Ring Road Garage / Performance cars of Buckingham?), ex F1 mechanic and Caterham owner. I have mine done at Chalky Whites in Milton Keynes.
-
Paul I have one from the Luminetion Competition system (has a round black connector) - just fitted megajolt so dizzy surplus to requirements 😬 Let me know if it is what you are after. Jonathan
-
Alistar If the coil pack is a 1st gen one , HT leads can be got from triggerwheels. If its not, I don't know! The problem with buying from halfords is that they can only search for make/model of car, on my car the coil pack is a lot further from the engine that it would be normally. You will be able to get spacers for the trigger wheel at triggerwheels.com Jonathan
-
You can buy the Megajolt box from here: www.autosportlabs.com technical info/forum/maps etc here: www.autosportlabs.net If you buy direct from the USA you will have to pay UK VAT and a parcel force "handling charge". I bought the EDIS bits from ebay, but triggerwheels are probably better, especially for HT leads - a bit difficult in Halfords try to find leads for a Caterham with Megajolt fitted The weber TPS and trigger wheels kits are very good, if a little pricey. Easy enough to fit with the engine in the car. If you blatmail me I can send you some pictures. Jonathan
-
Fit Megajolt. My xflow is running alot better now, cost me approx £250 but I did buy a weber TPS and Trigger wheel. Megajolt box approx £70
-
Box you need is a "Lucas 6DA Wiper control" - well thats what is on my 1992 Live axle car. Should just plug in to existing loom.
-
A chap in Milton Keynes had the same problem a couple of weeks ago, turned out to be short to ground on reversing light switch - I think wire had rubbed against chassis.
-
YHM
-
Have got the wiring diagrams from a 1992 xflow engine live axle car, if its any use to you. Drop me a mail if you want me to scan it and mail it. Jonathan
-
Have just fitted Megajolt to my 1700 xflow. Running ok but want to get it checked properly - cheaper than a new engine 😬 Only place I know of is Racing Developments (plus club members get a 10% discount ) I have spoken to them and they seem to be willing to tune a DIY system. Anyone used them before?
-
Hi Ian Might be worth checking if the Auxillary Venturi in carb is loose - I think I read that if it is loose fuel can get behind and leak out? Jonathan
-
Have just ordered a kit direct from America - only cost £38+p&p (£51 total) Link to website http://www.autosportlabs.org/index.php
-
I am looking at fitting a Megajolt ignition system to my xflow. I have found many sites on where to get the bits that attach to it (EDIS-4, trigger disc etc) but cannot find any where to buy the Megajolt kit. Can any body help?
-
Had the same problem with my car last year, i think it happened when the DVLA changed over to their new computerised MOT system. Might get a few questions if you want to sell it! The computer system also reckons a 7 should have power-assisted brakes and traction control - so mine technically fails!
