Guy Lowe

Are you saying that you lot are not using pre heaters?     Listen to 7 WONDERS OF THE WORLD he is talking sense   

Thanks Chris, it's been a few years and my age seems to affect my memory, I'll just plead ignorance  

Off to the LMC next week, does anyone bother doing this anymore?

Its unnecessary to remind me that I am welcome to do whatever I choose

I rest my case your Honor   

Beagler, you have posted asking for advice & recommendations which several people, who have considerable experience in this field, have kindly offered. However the tone and attitude of your replies is somewhat disparaging and unnecessary IMO. 

We are a friendly club with a membership who collectively have considerable knowledge of all things Caterham & Lotus 7, members that are more than to willing to help. Perhaps a bit of courtesy wouldn’t go amiss, after all it costs nothing.   

As JK says,perhaps a footrest  would help?

Reply #11 Indeed, thank you MRP 

Edited,

Message to self, do not post after drinking 

As Jonathan says, carbon particles are electrically conductive so if sucked into a Dremel they will burn it out, trust me I know 

Do a search on PT, some threads you might want to read. 

The COMPANY is still active & trading according to Companies House. 

When I bought mine the supplier drilled it, countersunk it and supplied the black anodised bolts & nylons at n extra cost. 

I have the 1" & they are great but I'm only 5' 6"   Fitted them 5 years ago & never had a problem with the Velcro but I cleaned the seats thoroughly with Isopropanol before applying. 

No fooling you Mr Webber

Common as muck, seems there are loads available on here 

I don't believe some people, you spend a fortune on an expensive toy and then bodge a job rather than spend £14 for the  CORRECT TOOL  and do it properly. 

A standard right hand wind back tool like THIS  will do the job but I found it's easier to get it on the caliper if you grind the small inner lugs off. IYSWIM

# 15 

Short WB T4/T5/T6 will be fine, just strap down the rear door 

I used self tappers but my car has Ali panels, best to buy from HERE

Good morning, can I have this please as I want to convert my car to in tank fuel pump. Pick up from Twickenham at your convenience  would be fine.

Guy

Hi Phil I will take the tunnel bag please. Will PM you. 

That's undoing it Tony, of all people you should know how to use an adjustable wrench  

Thanks for that michaelf, good idea will save on the use of cable ties

I don't think you will have "boiled" your brake fluid, the reservoir caps on Caterham master cylinders are notorious for leaking, especially the ones with level switches. Do it up as tight as you dare and wrap to catch any leakage.

EDIT: Also I don't fill mine to the top, probably 5mm below the bottom of the filler neck.