djg

Black pack windscreen surround and stanchions. Glass badly damaged requires new. Good condition. £100 + p+p.

Thanks Ray. Found it and purchased.

I'm looking for a Clayton fresh air heater as fitted late 90s. Embossed 7 on the casing. Many thanks in advance

Does this fit in the tillets? If so I'd like it please. Thanks Doug

Hi. Are these still available?

Seeing as eu2 engines are getting scarce has anyone swapped a standard Ecu eu2 engine to eu3 engine and ecu setup? Is it simply remove engine, associated loom and ecu and then replace with an eu3 setup? Or is there a lot more to it. TIA

Ntdwm This just popped up on FB market place in Wallingford Oxon. https://www.facebook.com/marketplace/item/542083976305009/

First question is are the rear brake lines solid or flexible onto the calipers? if they are solid then the problem maybe that the calliper is now sitting further over due to the brake line being set up for the older calliper size, and therefore the outer pad can float in the space. Just my thoughts.

I have a ford diff c/w lsd fitted in a 96 super light with de Dion and the ratio is stamped on the horizontal flat face just behind the nose. If you get under the car and diff and look at it just clean the flat faces and it could well be there.

If you after a plain black silicone hose then Classic silicone hoses do a Caterham 7 K series kit. Doug

On my k with dry dump if I remove the starter some times I have to slacken off the starter bolts a bit then start the car. Stop the engine and tighten the bolts. The starter doesn't always align nicely and just needs encouragement to fit. hope that helps Doug

Hi If u can locate it and its still reasonably serviceable I would be interested. I will message u once home tonight. Doug

Hi Barkalarr i only have my old 6 speed one, it has all fallen apart. I like it so am seeing if there are any out there. Thanks anyway.

I am looking for an original 6 speed leather gear knob for a 1997 car.. Thanks in advance? Doug

Hi Tim I would like the pump. Doug