Jump to content
Click here if you are having website access problems ×

david nelson

Member
 View Profile  See their activity

  • Posts

    4,036

  • Joined

  • Last visited

 Content Type 

Everything posted by david nelson

  1. david nelson
    Does anyone have a template for the holes for an fia battery master switch. Thanks David
  2. david nelson
    doing a bit of sorting and think its time for my plastic catch tank to go. Its needs to move as the master switch is doing in its place. Is there a a correct size we need for sprinting? is 1/2L ok or does it need to be 1L? any recommendations? thanks David
  3. david nelson
    Great new only 2 to go.
  4. david nelson
    No 3-in the list. Let's hope we all get in
  5. david nelson
    If I recoil correctly the original ones were for display only. There was something odd in the disclaimer
  6. david nelson
    Richard thank for the reply. The rack is out. I noticed it on braking with a clock. It felt similar to when I had a loose wheel. The steering feels fine. Checked the wheels all ok but if you get hold of the track rod you can reproduce the clunk. It's not at the ball joint but at the other end. Reading your post it may be the ball joint in the rack that needs trightening. No it is not as been back to the garage and if i get hold of the bit sticking out of the rack and it moves and can feel the clonk. David david
  7. david nelson
    Looks as if a bearing has gone one side of my steering rack. any tips on removal? can it be done with out removing the rad? once it out where or how easy is it to fix? Thanks David
  8. david nelson
    Has anyone got a spare eu3 engine loom? trying to find one but no luck yet. thanks David
  9. david nelson
    Does anyone have a spare eu3 k series engine loom? Thought I had found one, but looks as if the owner is away Thanks David
  10. david nelson
    Is the injector loom attached to the main engine loom? I spent hours looking for a similar issue only to find I had not concede the two plugs. David
  11. david nelson
    would it be easier to find a eu 2 engine loom?
  12. david nelson
    great day on the hill. An amazing drive from home to the event, more traffic on the way home. home in 45 mins due to rain and other road users. Paddock banter good as always and happy birthday Chris for tomorrow. The chocolate cake took me to a new level. Still do not understand how 54.30sec can leave you frustrated and wanting more?
  13. david nelson

    which gopro

    david nelson posted a topic in Speed

    my Lidli action cam battery has had its day and not changeable or able to rig un power it time to my again. I got a cheap ebay thing long story so not out of pocket but its not worth the plastic its made from. So what are people using? would like ability to see the run on my phone. thanks David
  14. david nelson
    can anyone recommend a andriod app to conect and veiw my vidios from my action cam? Thanks
  15. david nelson
    14 inch wheels are not the most popular size so value is never going to be high. I would put then on ebay and feel lucky with a few hundred pounds. remember you can get 4 new A539's for about £200 fitting easy just take the old ones off and put the new ones on. Thats if your on non adjustable dampers. if you are on adjustable then i would flat floor and check hight under sump and corner waights David
  16. david nelson
    Does anyone one know the make of the connectors used on the k-sereis eu3 engine loom? I am looking for the 4 pin Lambda connector. thanks David
  17. david nelson
    update: thought I would put some info for others as i go along Eu3 Alternator (arrived) MFRU part no: YWB 100970 INLET MANIFOLD MAP SENSOR MHK100820 (Arrived) ​IACV MDQ100170 LAMBDA MHK100840 Cam Camshaft Sensor New Genuine NSC000310 (arrived) Cam cover LDR104150
  18. david nelson
    Does anyone know the part for eu3 k series alternator? tried using search but just not able to find anything thanks David
  19. david nelson
    "But you will need to be sure the cam has the half moon for the cam sensor" how would I find out about this? David
  20. david nelson
    Oily thank you. now looking for all the above parts. David
  21. david nelson
    Anyone got parts to help me convert my eu2 to eu3 non vvc k series thanks David
  22. david nelson
    Can anyone help in giving me information on changing an eu2 k series to eu3? many thanks David
  23. david nelson
    OMG,
  24. david nelson
    Paul I am sure you have hit on the thing that is most impotent the compound. with the seven being so light for the road either soft or medium would be the way to go.
  25. david nelson
    Quick question, should this set up produce more BHP/torque? my standard 1.8K supersport produces 144bhp on the rollers. I was thinking of putting on Jenveys and an ecu but had thought would get over 150bhp David
×
×
  • Create New...