colindavies56

dont forget to wear some ed china gloves.

I have same as your 1st plugs,their motorcraft and1.3

don't know your new ones,maybe he's given you ones from the vct engine.they could be running hot/cold that's why their not firing.

remove the map and put that in the airing cupboard aswell,nothing to lose.

sorry mate,must be camera angle.

it just looks too large,and worn out.

whats the gap on that plug.

I've had 250 a couple of times in a 150roadsport

With the gauge shaking a fist at me.

all my fuses and relays are on show and never had a problem,my sat nav socket is just below the box and is also fine.i think you would be very unlucky for it to get splashed were it is.

fusebox cover,i did'nt even get one.thought they were too heavy and made the front dip down.

leave it off,it will save it falling off. .

caterham Spotted in isa at 6.30ish by senior managment,

Number plate s500.

Maybe you have the wrong belt and It's too long,

Fit correct belt and tentioner will not be as far out,if that makes sense.

Just been to check mine,i can get my finger down the gap from the alt belt tentioner.

2010,150 sigma.

That will be Dave Richards and me.

2 vipers,150roadsport,and a csr.

Just been for coffee and cars on the prom at rhos on sea,3rd Sunday in the month.

Then long way home through bedgelert to that cracking little ice cream shop.

I did see you and your buddies,thanks for the spot.

You and your mates are more than welcome at rhos,its for interesting cars.

That mk2 looked fantastic.

Is it not at the top of the brake peddle,or in the peddle box.

Do the brake lights work.

Yes,we got soaked too.

But the cars all sounded well.

Yes it was three gogs lads going on a pre bbq blat.

Dave Richards,Richard green,and me.

Thanks for the spot.

The fluid your describing should be binned,lost its viscocity.

And yes,if the peddle travels too far,the piston seals will pop out of the m/c.

But that should have happened before 35k.

You could pull the cover boot back while wife presses peddle and see if you could see part if the seals.

And no,slaves are not bullet proof.

in my 2001ford focus manual,it says

crankshaft  pulley bolt 115nm,85lbft.

that is for a 1.8,and 2.0ltr engines.

hope this helps.

Just ordered the discs.

Thanks Malcolm.