oldboarder

Mine was tied into the wiring loom near the rear drivers side wheel. Underneath the car.

Dan Watch Rob Oldland's you tube video.

Car builder solutions have a number of catches with different hole spacing. Could be worth a look !

Good choice of words considering your nickname !!

Ring A-Plan they are used to covering cars during a build.

you've had the Op then!!

On my 2017 310sv there was a power feed tied into the loom on the chassis accessible from the rear offside wheel arch. I fed that up into the boot and use it to charge my battery.

Guides/ Getting started !!!

I can certainly confirm that Roger knows the PD well following the run he gave the Leic/Notts/Derby group only the other Sunday. Have you used MYroute, that's available to club members. There are some good routes saved on there. https://www.lotus7.club/forum/blattour/new-blat-maps-functionality Martyn

I have SPA GT mirrors on the Eccles mounts. I found I could further stabilize these by making a thin metal bracket that fixed the rear of the Eccles mount to one of the original holes in the door. The other hole is also covered by the mount.

Changed my Roll bar to FIA type on my 2017 SV. I didn't need a new boot cover and the hood fits ok. Suppose it all depends on your model & type of FIA bar.

Don't trust "looks" get the chassis checked out. Mine got bumped & it didn't look bad but the rear basket had to be replaced by Arch motors.

Try googling "mesh lining". These look similar.

Badgers Mount in Elmsthorpe. Or Kirby House in Mallory itself.

Mrp I'm interested in the mirror mounts if they are still available, please PM me details.