AndrewE
-
Posts
229 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by AndrewE
-
Hi all What is the normal approach from the factory for stripes - are they painted or vinyl wrap? The reason for asking is I want to add a continuation stripe on the back panel to match the bonnet / nose stripe so want to know if its better to paint or wrap
-
Bob, Have a look at the pics at the end of this thread that I started for a variety of reasons but ended up looking at developing a new attachment system The thread is called 'Newbie Questions - pedal adjustment' Andrew
-
Any pics Ian? Am thinking of doing same Andrew
-
Jonathan, if you plan to get more I'd like two canisters plus two red and one black bag thanks Andrew
-
Hi I have noticed oil is dripping from the oil pressure sender on my K series. The drips seem to be coming from the larger end cap where this end cap is sealed to the main body of the sender. There is no oil on the outside of the largest part so I must assume it is coming from within the sender - see pic I assume this means a new sender but has anyone seen this before? (and no I don't want messages about changing to mechanical sender thanks)
-
so I tried adjusting the clutch pedal using the infor passed to me by Jonathan, thanks Also I have changed the Throttle Pedal. In stead of buying a £40 new one I bought a new MGB cable as it has the same ferrule for the throttle body end and is same diameter. I also bough a small solderless nipple for the pedal end, but to make this work I drilled a 2.5 mm dia hole in the back of the pedal tube Hopefuly the pics are self explanatory
-
Thanks Jonathan
-
Hi all I couldn't find a simple guide to adjusting pedals so any help appreciated Clutch pedal is sitting too high/too near seat so my hand hits my leg, as leg is slightly too bent when other pedals are the right distance. I want to move it away a bit - is it as simple as using the two lock nuts forward of the pedal box cover or will that change bite point? Also if I need/want to how do I adjust the brake and accelerator pedal. It looks like my S3 1997 chassis has three pivot holes and i assume both pedals must pivot on same hole Finally i am not that impressed by the way the throttle cable sits in the pedal - just a slot at the top which means fraying cables
-
Thanks all, will do similar to Pugwash but need to get a longer lead (or just make one myself) the one supplied by CTEK is too short
-
Hi Where have any of you ended up putting the charging lead for a CTEK charger. The one that comes with the kit is quite short which would mean engine cover off every time any ideas?
