Jump to content
Click here if you are having website access problems ×

A7 OOH

Account Inactive
  • Posts

    520
  • Joined

  • Last visited

Everything posted by A7 OOH

  1. Thanks I will take on board your comments.
  2. I need to replace the lower wishbone bushes on a 94 Classic SE. Understand these to be Y9 bushes. What is the easiest sequence to do this job with the minimum of stripping down. The anti roll bar bushes also need replacing but this is straight forward again Y9 bushes. Gordon
  3. Thanks Orangepeel 61 it is as you describe only I have few white cables. The +ve terminal three white wires (two crimped as one plus an additional white. The -ve terminal has two white and black crimped as one plus a white cable- there is also a white cable near the coil not connected? Andrew the car is a 1994 Classic SE the wires are as above.Correct the white to the + ve is live Car runs fine with tacho and ignition warning light going off.
  4. Thanks John- unfortunately I cant relate with your cable colours and what feeds are connected to the +VE and -VE terminals and Anker my thoughts the same-take off the manifold.
  5. Faffing around under the bonnet I disturbed the ignition coil connections. Can someone help and confirm the coil connections for the +ve and -ve terminals and respective colours and number of cables I have tried looking at the wiring diagram but my eyes must be past it. Maybe someone could photograph there coil connections. I did managed to get the car started ( after playing around with the cables), the tacho works and the ignition warning light goes out- just concerned I may be cross wired on the coil - ie the two white and black ignition feeds are connected to the neg terminal?????should this not be +ve. Current coil connections I have +ve 3 white cables ,-ve 2 white and black and 1 white if that helps Also how does one gain access to the Distributor-I can hardly see it under the cards yet access to check out. Do the Carbs have to come off or can it be accessed from underneath Thanks Gordon
  6. Anyone have a set of Chrome or S/S wiper arms and blades they no longer have a use for. Black currently fitted but I feel they do not match alloy screen surround. Thanks Gordon
  7. A7 OOH

    Crossflow MOT

    Very interesting and I too am in a muddle- I assume given the date of 1st Registration your car was subject to IVA/SVA which would have included basis emission testing the limits of which would appear on your V5C?
  8. Thanks John All sorted - JK stepped up to the block Gordon
  9. Are there any electronic copies of a Build Manual around that would cover a 1994 1600 X/Flow
  10. A7 OOH

    Crossflow MOT

    sorry for duplication - finger error
  11. A7 OOH

    Crossflow MOT

    What if CKD kit was purchased new in 1994, and not assembled and registered until 2007
  12. A7 OOH

    Crossflow MOT

    What if CKD kit was purchased new in 1994, and not assembled and registered until 2007
  13. A7 OOH

    For sale

    PM sent regarding lights
  14. Gates Cambelt & auto tensioner for £57 and genuine MG latest water pump and gasket for £36 both available on E bay
  15. I spotted that one Mathew, its just a bit too far to view and I do not want to bid blind,
  16. Looking for an alloyed bodied(unpainted) 7 with flared wings. Engine type not that important but would prefer one which is "Smoke Test Only" for MOT purposes. No offence to any members but I do not want one on a Q plate. I do not mind one requiring mechanical works but body must be ding and dent free.
  17. Does anyone have a Oxsted leather seat booster set for sale for a standard S3 Leather seats. Who knows someone may have bought a set, tried them and did not get on with them - or upgraded their seats Thanks
  18. Many Thanks Ian Gordon
  19. Need to replace the reverse light switch on my six speed box- is this a general part, anyone have a part number. Thanks
  20. For sale is my Mini Cooper Convertible Colour Red. Very Low mileage at under 10000 miles and fully maintained by Authorised Mini Dealership. This very high specification car is fitted with: Leather Heated Seats John Cooper Works Chili Pack Revering Camera Hard wired for Next Base Dash Cam Fitted with Mini Garmin Sat Navigation Mount Auto Air Conditioning Mini Driving Modes Tyre Pressure Monitoring Cruise Control Mini Excitement Lighting 17" Black Alloys The car also comes with the Mini TLC and MOT Protection pack valid until April 2021 which is TRANSFERABLE to the new owner LOW ROAD TAX AT £30 (The actual REMOVABLE Dash Cam Camera and Garmin Sat Nav Unit are Negotiable)-Hard wire and mount remain in situ. The car has been serviced in March and is MOT until April 2021 Asking price £9000 Consider p/x for XFlow, unpainted S3 with clamshells with cash adjustment
  21. Hi Nick Sorted out a replacement Bosch unit-so back on the road again by Friday.
  22. Before going down the route of buying new does anyone have a spare unit they wish to move on (possibly as a result of an upgrade) Cheers Gordon
  23. Found the oil seal now need the how???
×
×
  • Create New...