Pete H Posted June 28, 2004 Share Posted June 28, 2004 Due to there no longer being an R300 in my garage ☹️, I need to sell my 7.25 inch Raceco can and suitably modified Cat bypass pipe. Caterham prefered having the car back standard with the original exhaust. Wonderful bit of kit, very quiet, and much lighter than standard. No problems running an R300 at Bedford or Goodwood with this. Done two trackdays and about 1000 road miles. Fits directly onto R300/400/500 style primaries. Looking for £350 ono. Pete. Link to comment Share on other sites More sharing options...
F355GTS Posted June 28, 2004 Share Posted June 28, 2004 Peter What diameter is the inlet pipe? Mark Link to comment Share on other sites More sharing options...
Pete H Posted June 28, 2004 Author Share Posted June 28, 2004 Mark, 2.5 inch, Inner diameter. Peter. Link to comment Share on other sites More sharing options...
F355GTS Posted June 28, 2004 Share Posted June 28, 2004 Peter Sorry to be a pain but could you measure the overall length of the silencer from tip of inlet pipe to equvilent length of tail pipe ie overall length to fit between collector and rear wing If it fits I'll take it thanks Mark Link to comment Share on other sites More sharing options...
Pete H Posted June 29, 2004 Author Share Posted June 29, 2004 Mark, 42.5 inches from inlet pipe to furthest extent of the tail pipe. The inlet pipe is offset and angled into the silencer body to suit the shortened R300 collector. If your not planning to use it with R300 style primaries, then I think you may have problems fitting it. Drop me an email and I can send you some photos if you like. Pete. Link to comment Share on other sites More sharing options...
F355GTS Posted June 29, 2004 Share Posted June 29, 2004 Peter thanks for info, sadly it's too long, (Coyoteracer) was round earlier and we measured his raceco so was kind of expecting it ☹️ So back to the top for Peter, it's still for sale :) Mark Link to comment Share on other sites More sharing options...
Anthony Posted June 30, 2004 Share Posted June 30, 2004 This is a fantastic bit of kit and a bargain for anyone with an R300 Anthony Raceco can on and it looks stunning Link to comment Share on other sites More sharing options...
Steve Brown Posted June 30, 2004 Share Posted June 30, 2004 YHM Link to comment Share on other sites More sharing options...
john powell Posted June 30, 2004 Share Posted June 30, 2004 Peter, is this still for sale 🤔 I'm interested if its in good nick. It should all fit to replace standard R400 item 🤔 Let me know either way. Cheers John. Link to comment Share on other sites More sharing options...
Pete H Posted June 30, 2004 Author Share Posted June 30, 2004 This is now sold. Thanks for all the interest. Pete. Link to comment Share on other sites More sharing options...
SteveP Posted July 1, 2004 Share Posted July 1, 2004 Peter, Wish I'd know you were selling this - I'd have had it off you. Ah well, if the sale falls through let me know. Cheers SteveP Link to comment Share on other sites More sharing options...
RESOLVIWOLF Posted July 1, 2004 Share Posted July 1, 2004 damm !! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now