Brian James Tow Hitch Spacer

[Andrew Willcox]

Long shot… but does anyone have a spare 50mm spacer to raise the hitch from the frame on a Brian James Minno trailer?

 

[paul richards]

I don’t have a spacer (I didn’t know there was one) but I simply used 2 pieces of 50mm x 50mm box section. I welded plate on the ends to blank them off and drilled the appropriate holes in them. An easy job that can be done by any engineering workshop if you can’t manage it yourself. There is a thread on here somewhere with pictures but I’m blowed if I can find it. 

[Jonathan Kay]

1 minute ago, paul richards said:

I don’t have a spacer (I didn’t know there was one) but I simply used 2 pieces of 50mm x 50mm box section. I welded plate on the ends to blank them off and drilled the appropriate holes in them. An easy job that can be done by any engineering workshop if you can’t manage it yourself. There is a thread on here somewhere with pictures but I’m blowed if I can find it. 

Jonathan

PS: Always happy to discuss searching...

 

[paul richards]

Thanks Jonathan. I knew you’d be able to find it. 

[Andrew Willcox]

Thanks both… I think I know someone who can help out with fabricating some spacers as you suggest.

Would still take a BJ spacer if anyone has one available.