jody391 Posted May 31, 2023 Share Posted May 31, 2023 On my Lotus I had Stahlbus speed bleeders and they are blinking mega! Easy to use, simple on your own and allow a mega peddle to be setup.But does someone know the std front (Girling I believe) caliper bleed nipple size and length?and also the rear caliper nipple thread size and length?cheers, Jody. Link to comment Share on other sites More sharing options...
Area Representative jonsymons Posted May 31, 2023 Area Representative Share Posted May 31, 2023 No idea...but I recently had my front (Girling Type 12) calipers refurbished by Bigg Red (www.biggred.co.uk) and I'm sure a call to them would get you all the info/bits you need. Speak to James. Link to comment Share on other sites More sharing options...
rkeywood Posted May 31, 2023 Share Posted May 31, 2023 Part no for Girling Type 12 caliper bleed nipple is 601959 - it's a 3/8" x24TPI 'long pattern' Link to comment Share on other sites More sharing options...
jody391 Posted May 31, 2023 Author Share Posted May 31, 2023 Thanks guys, greatly appreciated. Jody. Link to comment Share on other sites More sharing options...
ScottR400D Posted May 31, 2023 Share Posted May 31, 2023 Do Stahlbus do one in the right size for a 7? Edit: apparently yes but almost £30 EACH!? Don't think I'll bother...... Link to comment Share on other sites More sharing options...
TheArchitect Posted September 20, 2023 Share Posted September 20, 2023 Did you succeed with sourcing Stahlbus speed bleeders?Looking around I think my 2007 front brakes need 3/8" and the rears are M10x1.0 but I haven't been able to get this 100% confirmed yet!https://www.demon-tweeks.com/uk/stahlbus-speed-bleeder-valve-245978/ Link to comment Share on other sites More sharing options...
jody391 Posted September 20, 2023 Author Share Posted September 20, 2023 I couldn't find them, or the length required.I don't mind £30 as it's so much simpler and you get an amazing peddle so easy!but without pulling mine out I can get the correct measurements. Link to comment Share on other sites More sharing options...
JP Posted September 20, 2023 Share Posted September 20, 2023 Are these significantly better than an eezibleed? Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted September 20, 2023 Member Share Posted September 20, 2023 The stahlbus bleeder valve.Jonathan Link to comment Share on other sites More sharing options...
jody391 Posted September 21, 2023 Author Share Posted September 21, 2023 Ok so if I am right (please check if you can anyone?) these for the front - Buy Stahlbus Speed Bleeder Valve | Demon Tweeks (demon-tweeks.com) And the rear.. M10 x 1.0 but what length??Jody. Link to comment Share on other sites More sharing options...
SM25T Posted September 21, 2023 Share Posted September 21, 2023 DT £120 for a set of 4 (and then all 4 the same thread). Also shown as a 'clearance' item, so maybe not being supplied for much longer ? Link to comment Share on other sites More sharing options...
jody391 Posted September 21, 2023 Author Share Posted September 21, 2023 But surely the threads and length wont be correct if you get all 4 the same??Is this something you have done buddy?Jody. Link to comment Share on other sites More sharing options...
SM25T Posted September 21, 2023 Share Posted September 21, 2023 #12 ... that is precisely my point. You would have to buy 2 sets of 4 and share with another car ! Not for me. Link to comment Share on other sites More sharing options...
jody391 Posted September 21, 2023 Author Share Posted September 21, 2023 If you click N/A instead of a colour you can chose just 2, the thread length is however only 22mm long for the fronts?Buy Stahlbus Speed Bleeder Valve | Demon Tweeks (demon-tweeks.com) And the m10 x 1 are only 20mm in length??Buy Stahlbus Speed Bleeder Valve | Demon Tweeks (demon-tweeks.com)If this looks correct i will purchase and give them a try.Jody. Link to comment Share on other sites More sharing options...
SamC Posted February 20 Share Posted February 20 Has anyone tried the Goodridge speed bleeders? Half the price and seem to get good reviews elsewhere… Link to comment Share on other sites More sharing options...
jody391 Posted February 21 Author Share Posted February 21 I have these on my F31 BMW, and work well. Not as nice as the Stahlbus bleeders but ok. Jody. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now