Battery Master Switch Fitting

[Bizzielizzie13]

I'm fitting a battery master switch to our 2012 R300 Duratec. Could any kind person please 'post' a copy of the relevant page from the build manual & the ignition wiring diagram. It is the detail in positioning the switch & the ignition supply that is my concern.

Thanks David.

[Jonathan Kay]

Private Message sent.

[R300 FNL]

I would be interested in this aswell if anyone has any info on the fitting of the switch etc. I take it the scuttle panel does t need to come off. Thanks 

[Jonathan Kay]

Private Message sent.

[Golf Juliet Tango]

This is in the Guides, isn't it?

https://www.lotus7.club/guides/how-guides/fitting-battery-master-switch

Exactly what the Guides are for.  What would be really useful is if someone would do some research & curation to extend them. We need a keen research volunteer to do this.

It is almost certainly in the LowFlying archive too.

 

[Bizzielizzie13]

Thanks all for help & links etc.

I just now need to find the correct ignition feed from the starter button (I don't have an ignition barrel) Caterham say there 'may be' a loop in the loom near where the switch fits......

Cheers David

[raw]

Assuming that Caterham haven't changed the colours in the harness over the years, there should be 2 wires on the back of the starter button - white and white/red. White is the +12V supply from the battery/fusebox and white/red goes to the starter solenoid.

Hope that helps?

Andrew