Hanns Per Posted February 2, 2021 Share Posted February 2, 2021 What to do with a presumably worn out bearing of the rocker rocker assembly (200.000km). Did anyone think about alternatives such as Delrin bushes or needle roller bearings? Or is it the simpliest to replace the oilite bush and spigot where could one buy this? thks Hanns Per Link to comment Share on other sites More sharing options...
Area Representative paul richards Posted February 2, 2021 Area Representative Share Posted February 2, 2021 I'd ask Caterham first for a bush, but if they can't help I think the chassis and all the fabricated bits were manufactured by Arch so it might be worth a call to them. Link to comment Share on other sites More sharing options...
Hanns Per Posted February 2, 2021 Author Share Posted February 2, 2021 think I could identify the bearing Bowman oilite AJ 1216-20 (3/4 x 1 x 1 1/4) now I need to find the spigot Link to comment Share on other sites More sharing options...
Tazio Posted February 2, 2021 Share Posted February 2, 2021 As the CSR models are still being made in small quantities for the export market, the part should be current, all you need to do is identify the manufacturer is, perhaps Quaife? Link to comment Share on other sites More sharing options...
7 wonders of the world Posted February 2, 2021 Share Posted February 2, 2021 Tony or Darren @ CC should be able to supply these for you Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now