Jonathan Kay Posted August 26, 2020 Share Posted August 26, 2020 I need a small metal piece to restore a tagalong tandem trailer trike to roadworthiness and two grandchildren to what they see as their natural position in the grand scheme of being.Two Members have helped me out in the past by fabricating similar bits, and I'd be very grateful for any offers, or failing that, suggestions for commercial suppliers.I can supply a sketch with measurements, but not a CAD file.I'd be very happy to pay, or donate to charity, or whatever you'd like.Thanks in advanceJonathan Link to comment Share on other sites More sharing options...
K7 VCT Posted August 26, 2020 Share Posted August 26, 2020 Hi Johnathan, a guy in our village fabricates odd things. I will ask him for you. Not far from You, near witney. Ox29 Be in touch. Cheers Julian Link to comment Share on other sites More sharing options...
Jonathan Kay Posted August 26, 2020 Author Share Posted August 26, 2020 Thanks. That would be great.Jonathan Link to comment Share on other sites More sharing options...
jackb_ms Posted August 26, 2020 Share Posted August 26, 2020 There is a company called Specialist Welding and Fabrication in Drayton.Tel: +441235820821They make a repair all sorts of things.Jack Link to comment Share on other sites More sharing options...
rj Posted August 26, 2020 Share Posted August 26, 2020 And when anything else fails, then I can make it in Denmark! Link to comment Share on other sites More sharing options...
garybee Posted August 26, 2020 Share Posted August 26, 2020 You could cut that out of a bit of steel tube in a few minutes. Link to comment Share on other sites More sharing options...
K7 VCT Posted August 26, 2020 Share Posted August 26, 2020 Hi Johnathan, sorry just learnt he had a stroke in the last few weeks, poor bugger, he was such as nice chap to. Best of luck in your search. Link to comment Share on other sites More sharing options...
Area Representative Geoff Brown Posted August 26, 2020 Area Representative Share Posted August 26, 2020 Appropriate size square tube cut & drilled to suit. Must be some scrap lying around somewhere? Link to comment Share on other sites More sharing options...
Jonathan Kay Posted August 27, 2020 Author Share Posted August 27, 2020 Replies to Private Messages on the way. I'm overwhelmed by the helpfulness of Members, but not surprised because I've been the beneficiary before. :-)Thanks, everybody.Jonathan Link to comment Share on other sites More sharing options...
p.mole1 Posted August 27, 2020 Share Posted August 27, 2020 I hope you remember how wide the rear is and don't cycle to many Sustrans routes! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now