Hanns Per Posted January 4, 2019 Share Posted January 4, 2019 After abt. 155.000km I did change the spherical bearings this winter (front lower rear upper and lower). They where pretty much worn out so I should have done this already last winter i.e. 15.000km earlier. At this occasion I checked with the CSR supplementary assembly guide and realized that I had the upper wishbones not correct in place. The spherical bearing circlip showed downwards and not upwards as per the assembly guide. Furthermore the guide states the lefthand wishbone is marked with an L and the right hand wishbone has no marking. I could not find any marking on the wishbones at all. Could it be that there is no difference of the LH and RH wishbones for the CSR200?? Thank You for Your feedback Hanns Per Link to comment Share on other sites More sharing options...
mic Posted January 4, 2019 Share Posted January 4, 2019 Pretty certain they are different. Where have you looked for the marking? Link to comment Share on other sites More sharing options...
Hanns Per Posted January 4, 2019 Author Share Posted January 4, 2019 all over but specially on the bearing housing Link to comment Share on other sites More sharing options...
mic Posted January 4, 2019 Share Posted January 4, 2019 The mark should be on the middle part of the "U" of the wishbone. It is just the letter L. Link to comment Share on other sites More sharing options...
Hanns Per Posted January 4, 2019 Author Share Posted January 4, 2019 Oh yes I got it now almost not visible small scratch in the paint. Thank YouHanns Per Link to comment Share on other sites More sharing options...
Hanns Per Posted January 5, 2019 Author Share Posted January 5, 2019 this is the difference between the left and right upper rear wishbonewhere would I find the marking on the lower rear wishbones cant find anything?? thks Link to comment Share on other sites More sharing options...
mic Posted January 5, 2019 Share Posted January 5, 2019 Should be the same place Hanns. Link to comment Share on other sites More sharing options...
Hanns Per Posted January 15, 2019 Author Share Posted January 15, 2019 here it is and me fool did see it, now after paining Link to comment Share on other sites More sharing options...
SM25T Posted January 15, 2019 Share Posted January 15, 2019 Hi Hanns Per.Maybe it is easier to see after cleaning and new painting ? Ian Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now