CtrMint Posted February 6, 2019 Author Share Posted February 6, 2019 Link to comment Share on other sites More sharing options...
CtrMint Posted February 6, 2019 Author Share Posted February 6, 2019 Link to comment Share on other sites More sharing options...
CtrMint Posted February 6, 2019 Author Share Posted February 6, 2019 I've done a quick test fit of the nose and it went straight on, clips at the side of the nose were a doddle and a massive difference no fighting whatsoever. It appears to have cleared the rad too, not massive amounts of space but sufficient to avoid touching. I've connected up the bottom coolant hose, and both oil cooler lines. I've not connected the coolant top hose as I need to place the catch can underneath, adding the catching can now would seem a poor choice as I need to connect the electrics for the headlights to the loom, the catch can would make access very difficult. I've not done any of the work for the side repeater so I figure I need to do that now, so that I can complete the electrics, then catch can and so forth. Unless anyone suggests an alternate approach? Link to comment Share on other sites More sharing options...
CtrMint Posted February 6, 2019 Author Share Posted February 6, 2019 It's looking good Link to comment Share on other sites More sharing options...
aerobod - near CYYC Posted February 7, 2019 Share Posted February 7, 2019 Glad it looks like you’ve got over most of the issues now - it WILL be worth it in the end! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now