2GBR Posted July 20, 2013 Share Posted July 20, 2013 Just asking if anyone has a recomendation for rebuild/refresh on driveshafts, Or has done it them selves 🤔 Link to comment Share on other sites More sharing options...
rgrigsby Posted July 20, 2013 Share Posted July 20, 2013 There was an article on how to do this in Low Flying a while back, I don't have it to hand but I suspect someone will. Link to comment Share on other sites More sharing options...
2GBR Posted July 20, 2013 Author Share Posted July 20, 2013 That would be great as a new member i do not have that issue, If someone has this could they photocopy and post or e-mail it across please costs reinbursed of course Link to comment Share on other sites More sharing options...
Mankee Posted July 20, 2013 Share Posted July 20, 2013 If the article appears in Low Flying within the last 4 years, I will have it on the shelf. I can drop it round next time I see you, Gerry? Just need someone to let me know which issue I'm looking for! Link to comment Share on other sites More sharing options...
Support Team c7trp Posted July 21, 2013 Support Team Share Posted July 21, 2013 I wrote the article. I have a pdf copy somewhere on my pc. I will dig it out for you. Edited to say, it covers the later GKN shafts not the earlier Ford derived ones. Like these ones The Ford ones have smooth tin covers adjacent to the boot rather than a fluted casting. Edited by - c7trp on 21 Jul 2013 07:57:26 Link to comment Share on other sites More sharing options...
Support Team c7trp Posted July 21, 2013 Support Team Share Posted July 21, 2013 Found it - I didn't realise my filing system was so efficient BM me your email addy and I'll send you a copy Edited by - c7trp on 21 Jul 2013 08:22:43 Link to comment Share on other sites More sharing options...
2GBR Posted July 22, 2013 Author Share Posted July 22, 2013 Thank you all for posting I have the earlier Ford Sierra ones i do have a couple of spare sets thank goodness. And have spoken to RecoProp in Luton who believe that they can help me out Link to comment Share on other sites More sharing options...
Support Team c7trp Posted July 22, 2013 Support Team Share Posted July 22, 2013 2GBR - you didn't send your email address on the BM Link to comment Share on other sites More sharing options...
2GBR Posted July 22, 2013 Author Share Posted July 22, 2013 Woops Link to comment Share on other sites More sharing options...
Area Representative Kingsley Young Posted July 22, 2013 Area Representative Share Posted July 22, 2013 Redline rebuilt mine for me. Kingsley Link to comment Share on other sites More sharing options...
BBL Posted July 22, 2013 Share Posted July 22, 2013 c7trp - Just click on "Reply" within the BM, and the e-mail address of the BM sender will be revealed! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now