Baz Posted March 8, 2012 Share Posted March 8, 2012 I am after the valve clearances for a 92 supersprint as I have several different settings and would like to get them correct before the season begins. Link to comment Share on other sites More sharing options...
Roger King Posted March 8, 2012 Share Posted March 8, 2012 Official clearances .022" inlet, .024" exhaust. I always used to set them a couple of thou tighter which would usually quieten things down a bit without any risk to the engine. Link to comment Share on other sites More sharing options...
scorcher Posted March 11, 2012 Share Posted March 11, 2012 Is that with a hot or cold engine ? Link to comment Share on other sites More sharing options...
oilyhands Posted March 11, 2012 Share Posted March 11, 2012 Set on a cold engine, they should close up a little bit when hot. Oily Link to comment Share on other sites More sharing options...
OliverSedlacek Posted March 11, 2012 Share Posted March 11, 2012 What engine? Link to comment Share on other sites More sharing options...
Gordon C Posted March 11, 2012 Share Posted March 11, 2012 They are talking Kent xflow here Link to comment Share on other sites More sharing options...
scorcher Posted March 12, 2012 Share Posted March 12, 2012 Oily - many thanks. Link to comment Share on other sites More sharing options...
OliverSedlacek Posted March 12, 2012 Share Posted March 12, 2012 I thought you set them hot on an XFlow, or does it depend on the specific cam? Link to comment Share on other sites More sharing options...
Roger King Posted March 12, 2012 Share Posted March 12, 2012 No, cold, but in any case it's all a bit approximate what with pushrods, rockers, etc. If you get them all spot on and then check them again, they'll have changed a thou or so. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now