bryn7 Posted February 20, 2008 Share Posted February 20, 2008 following the sale of my 7 i need to sell all my bits i have accumulated over the last few years to fund the purchase of my next car. oil filter, purchased from redline but never used £5 inc uk delivery sbd exhaust can £150 sold ported & polished coscast head with cam caps. dye pen crack tested, fitted bronze guides and 3 angle valve seats cut for +1mm valves £420 paul ivey +1mm valves new £185 swindon cams, p24/p25 P24/P25 are what we use for tarmac rally. i was told by swindon that they are a later development to the JPE and 225 / 235 profiles. Better all round , more top end, better mid-range and smoothes out the "on cam" feel which the JPE profiles give at 4500 rpm. In: 295 deg, .440" Ex: 295 deg, .440" solid profile, new £350 swindon coverted solid lifters with insert/shim combo unused since conversion/refresh £125 piper double valve springs and steel retainers new £150 omega high compression 86mm pistons used from steve mell £200 thanks for looking. whatever doesn't sell, i'll put on e-bay. thanks all Edited by - bryn7 on 20 Feb 2008 20:08:28 Edited by - bryn7 on 27 Feb 2008 18:33:17 Edited by - bryn7 on 8 Mar 2008 21:10:44 Edited by - bryn7 on 12 Mar 2008 10:31:49 Edited by - bryn7 on 15 Mar 2008 12:49:51 Edited by - bryn7 on 17 Mar 2008 15:01:00 Link to comment Share on other sites More sharing options...
Alba 7 Posted February 20, 2008 Share Posted February 20, 2008 Bryn, You have mail ref the ECU coil and gaskets. Nick. Link to comment Share on other sites More sharing options...
Gambo Posted February 20, 2008 Share Posted February 20, 2008 If the can is the titanium one from SBD with a 2 3/4 bore. I'll take that off your hands please. If not What spc is it, I may well be still interested. RED 2.0 HPC 230BHP here Link to comment Share on other sites More sharing options...
Mavic82 Posted February 20, 2008 Share Posted February 20, 2008 Would like first 'dibs' on the cam belt and verniers please. Thanks Guy Link to comment Share on other sites More sharing options...
bryn7 Posted February 20, 2008 Author Share Posted February 20, 2008 hi all. the can is sold to mike c. alba 7 has dibs on the ecu & loom, coil and gasket sets subject to confirming he wants them. the cam belt and verniers are yours mavic82. Link to comment Share on other sites More sharing options...
F355GTS Posted February 20, 2008 Share Posted February 20, 2008 bryn if Alba doesn't take the top gasket set , I'll have it assuming it's a genuine GM one Mark Link to comment Share on other sites More sharing options...
bryn7 Posted February 27, 2008 Author Share Posted February 27, 2008 original post now updated with sold items removed. mark. alba7 has had the gasket sets. cheers all bryn Link to comment Share on other sites More sharing options...
bryn7 Posted March 8, 2008 Author Share Posted March 8, 2008 updated again Link to comment Share on other sites More sharing options...
bryn7 Posted March 12, 2008 Author Share Posted March 12, 2008 any offers before i put them all on e-bay? Link to comment Share on other sites More sharing options...
Nick Green Posted March 13, 2008 Share Posted March 13, 2008 Bryn7, Y should HM yesterday ?? Nick Link to comment Share on other sites More sharing options...
bryn7 Posted March 13, 2008 Author Share Posted March 13, 2008 hi nick, my e-mails seem to be down at the moment but i have sent you a blatmail with my phone numbers if you want to ring me. cheers Link to comment Share on other sites More sharing options...
bryn7 Posted March 17, 2008 Author Share Posted March 17, 2008 cam details updated. all going on e-bay tomorrow. cheers Link to comment Share on other sites More sharing options...
bryn7 Posted March 17, 2008 Author Share Posted March 17, 2008 on ebay now cams should be here follow the link for the rest of the stuff if you are interested thanks Link to comment Share on other sites More sharing options...
Gambo Posted March 19, 2008 Share Posted March 19, 2008 Bryn, My e-mail is down, can you call me. Ta RED 2.0 HPC 230BHP here Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now