Nick Pargiter Posted September 3, 2007 Share Posted September 3, 2007 After a few winter re-builds I have ended up with a selection of bits surplus to requirements. I have finally got fed up trying to work around them or moving them to get to other bits. Std Roll Bar (94 de-dion) and Boot Cover. £20 Standard Brake Master Cylinder. £25 Bodywork parts (car was painted Jaguar BRG with yellow nose band and bonnet strip) Bonnet, no cut out, 7 louvres(incl heater), good condition. £50 Advetised here first before they go to feeding time at the zoo on E-bay. The parts are in Sussex but I work near Guildford so can be transported there if easier. Nick Edited by - Nick Pargiter on 3 Sep 2007 20:26:17 Edited by - Nick Pargiter on 4 Sep 2007 07:50:05 Edited by - Nick Pargiter on 5 Sep 2007 12:58:35 Edited by - Nick Pargiter on 10 Sep 2007 20:36:38 Edited by - Nick Pargiter on 12 Sep 2007 07:32:03 Edited by - Nick Pargiter on 26 Sep 2007 20:33:21 Edited by - Nick Pargiter on 4 Oct 2007 21:39:06 Link to comment Share on other sites More sharing options...
lancelot Posted September 3, 2007 Share Posted September 3, 2007 Can I have the headlights please. Can you send them? Cheers Paul Link to comment Share on other sites More sharing options...
Martyn Heesom Posted September 3, 2007 Share Posted September 3, 2007 If you are willing to post them, I will have the steering wheel/column, please. Edited by - Martyn Heesom on 3 Sep 2007 20:42:51 Link to comment Share on other sites More sharing options...
Area Representative Richard Price Posted September 3, 2007 Area Representative Share Posted September 3, 2007 1st dibs for all three DeDion ears please (as long as they're 1.5° ones) Will you be at the 50th do? Link to comment Share on other sites More sharing options...
Mark Gregory Posted September 3, 2007 Share Posted September 3, 2007 YHM Re: Nose cone & rear wings. Link to comment Share on other sites More sharing options...
C7 BAD Posted September 3, 2007 Share Posted September 3, 2007 Hi all,am back in Caterham ownership after a long break Will have the handrake assembly if still available... Keith. Link to comment Share on other sites More sharing options...
chris perry 1 Posted September 3, 2007 Share Posted September 3, 2007 Hello, Im after a bonnet for a 1600 vx classic. Does your bonnet have a cut out in it for carbs? Does it have seven louvres? ie Fresh air heater. Thanks, Chris P Link to comment Share on other sites More sharing options...
blade_runner Posted September 3, 2007 Share Posted September 3, 2007 1st dips on the Bilsteins and platforms if you can post at a reasonable cost please 'Pinky Pics' here Link to comment Share on other sites More sharing options...
blade_runner Posted September 3, 2007 Share Posted September 3, 2007 PS at a push I might be able to pick them up over this weekend if that suited? Getting blat withdrawl symtoms with no shocks on the car! 'Pinky Pics' here Link to comment Share on other sites More sharing options...
Neil_K Posted September 3, 2007 Share Posted September 3, 2007 2nd dibs on nosecose please!!!!! (Nuts, I;m always too late) It's the exact same colour as mine! Link to comment Share on other sites More sharing options...
CharlesElliott Posted September 4, 2007 Share Posted September 4, 2007 Also interested in the ears if they are 1.5degree ones. Charles --- My SuperGraduates 2006 diary My SuperGraduates 2005 diary, My Caterham Academy 2004 build and race diary Link to comment Share on other sites More sharing options...
Nick Pargiter Posted September 4, 2007 Author Share Posted September 4, 2007 Guys For those requesting postage costs I will look into that this evening and get back to you tomorrow. I will double check the ears as well but there are no marks on them to indicate they are the 0.25 deg ones. Mark - I haven't received any mail yet but you have first dibs Keith - this is the handbrake lever and all the cables, not the callipers Chris - the bonnet has the 7 louvres including the heater and has not been cut for carbs or TB's Nick Link to comment Share on other sites More sharing options...
flp Posted September 4, 2007 Share Posted September 4, 2007 Hi 1st Dibs for the tunnel top (if you're ok to post to France, i will pay for extra cost for delivering of course) Thanks ! Link to comment Share on other sites More sharing options...
Mark Gregory Posted September 4, 2007 Share Posted September 4, 2007 Nick: Hmmmm, e-mail was sent immediately after I posted, strange . I'll definitely have the rear wings & nosecone (sorry Neil ). Perhaps if you could try e-mailing me your address I'll send you a cheque. Hopefully it will work the other way round..... Thanks, Mark Link to comment Share on other sites More sharing options...
Neil_K Posted September 4, 2007 Share Posted September 4, 2007 Grrrrrrrr! No worries Mark, if it doesn't work out please let me know. Link to comment Share on other sites More sharing options...
Klunk Posted September 4, 2007 Share Posted September 4, 2007 Hi Nick, 2nd dibs on the handbrake & cables if Keith changes his mind - Thanks. Giles. Link to comment Share on other sites More sharing options...
JACK FLASH Posted September 4, 2007 Share Posted September 4, 2007 If the pair of fog lightsare the old type(used between approx. 1980 and 1996) I' ll definitely take them. Can you send them to Belgium (postage costs) or can we arrange pick up and payment at the weekend of 14 - 15 - 16 September ? Link to comment Share on other sites More sharing options...
blade_runner Posted September 4, 2007 Share Posted September 4, 2007 Nick yhm regarding those bilsteins 'Pinky Pics' here Link to comment Share on other sites More sharing options...
C7 BAD Posted September 4, 2007 Share Posted September 4, 2007 Deffo want the handbrake and cables,please let me know the cost with postage... Keith. Link to comment Share on other sites More sharing options...
AMMO Posted September 5, 2007 Share Posted September 5, 2007 Nick I have a 1990 De Dion with the under-dash hand brake. I have been looking at padding the tunnel top as I tend to lean my elbow on it. Wasn't aware there was a tunnel top vinyl cover. Is it padded? Will it fit with bench seats? Any chance of emailing a photo please? I don't think I have ever seen one. The top of my transmission tunnel is rounded, not square. If so can you send to raceco@btinternet.com Many thanks AMMO Link to comment Share on other sites More sharing options...
JACK FLASH Posted September 7, 2007 Share Posted September 7, 2007 Nick, I have sent you 2 Blatmails to work out the details for delivery and paying the fog lights, but unfortunately no answer. I think there is something wrong with the mailing function ? ! Link to comment Share on other sites More sharing options...
flp Posted September 7, 2007 Share Posted September 7, 2007 Yes I've got the same problem, I've mailed Nick and no anwser. Link to comment Share on other sites More sharing options...
Nick Pargiter Posted September 7, 2007 Author Share Posted September 7, 2007 Jack and flp YBHM Keith - I will let you know the postage cost for the handbrake over the weekend. Nick Link to comment Share on other sites More sharing options...
C7 BAD Posted September 7, 2007 Share Posted September 7, 2007 Good man,thanks Keith. Link to comment Share on other sites More sharing options...
JACK FLASH Posted September 7, 2007 Share Posted September 7, 2007 Nick, I' ve sent you another Blatmail. If you do not receive it, just look at my profile for my e-mailadress. Now I' m going to sleep ! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now