JampJ Posted August 12, 2006 Share Posted August 12, 2006 Can anyone give me a part number for the rear wheel brake cylinders? Cheers J&J JFDI (Just F*****g Do It) Link to comment Share on other sites More sharing options...
Revin Kevin Posted August 13, 2006 Share Posted August 13, 2006 John, Sorry don't know the part No, but they are just bog standard Ital cylinders. Cheers Chris Link to comment Share on other sites More sharing options...
roger7 Posted August 13, 2006 Share Posted August 13, 2006 Last year, I bought a rear brake cylinder for my 1996 live axle from CC for £22 incl. vat and postage. The CC part no. was 64673049. Part nos. and vehicles on the actual box were: 4926 GWC1110 Dolomite,Spitfire, Maxi, Marina Diam. 17.5 - 11/16" Hope this helps! Link to comment Share on other sites More sharing options...
elie boone Posted August 13, 2006 Share Posted August 13, 2006 The Lockheed nr : LW 33476 Link to comment Share on other sites More sharing options...
JampJ Posted August 13, 2006 Author Share Posted August 13, 2006 Thanks Guys Cheers J&J JFDI (Just F*****g Do It) Link to comment Share on other sites More sharing options...
Ferrino Posted August 13, 2006 Share Posted August 13, 2006 Bear in mind that there are 2 different bore sizes available! Link to comment Share on other sites More sharing options...
JampJ Posted August 13, 2006 Author Share Posted August 13, 2006 Thanks, do you have details? Cheers John JFDI (Just F*****g Do It) Link to comment Share on other sites More sharing options...
Ferrino Posted August 14, 2006 Share Posted August 14, 2006 Yes, IIRC, the two sizes are 0.7" and 0.75" - it should be stamped onto the cast body of the cylinder. When I stripped the car down for the rebuild, I found that the previous owner/garage had fitted a different size bore on each side If you are unsure on which size to fit then perhaps give James Whiting a call. HTH. Link to comment Share on other sites More sharing options...
wheely Posted August 14, 2006 Share Posted August 14, 2006 There is a post somewhere regarding the thread type for the brake pipe being different on factor / caterham supplied cylinders for ital axles also. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now