Gambo Posted May 5, 2006 Share Posted May 5, 2006 How do I tell the camber angle on the dedion ears. i.e weather they are crossply or radial ears. I have bought a new set from caterham, they have 1 and 1.07 stamped on the top, but they appear to angle the same way RED 2.0 HPC Link to comment Share on other sites More sharing options...
Davey Bee Posted May 5, 2006 Share Posted May 5, 2006 I think thats for radials TRY 5S Confussed Link to comment Share on other sites More sharing options...
DSL Posted May 5, 2006 Share Posted May 5, 2006 Just checked the ones I took off, they were for radial CR500's but can not find any markings or numbers at all on them sorry Link to comment Share on other sites More sharing options...
Rob Bailey Posted May 6, 2006 Share Posted May 6, 2006 1 side of the ears are flat and the other has been machined to give a camber angle. if you measure the width of the ears at the top and then at the bottom you should be able to calculate the angle through pythagorus (spelling?). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now