Phillip, if you are interested in putting the Zetec engine in, as previous Blatchat discussions, I would be interested in your engine
Having just had a X-flow built by Roger, I am looking for a medium term project
Best regards
If you are interested in fitting the Zetec from previous Blatchat discussions I am looking for a BDR in need of re-build, to put steel internals in etc etc. Having just re-built my 1800 X-flow for 7K with Roger, I am looking for a medium term project.
Please let me know if you go down an alternate Zetec route
Best regards
Heater, pipes, heater control from 1990 De-Dion. All in perfect condition.
Can be delivered.
£50
Braded brake hoses - pefect condition, on swapped as I now have wide track. Offers
Please contact Anthony.burgess@cwcom.cwplc.com
Hi Jace, I have a set of Clam shell wings ( Black ) with repeaters fitted and would like to swap for cycle wings - what colour/size are yours please - are they for 13" wheels or 15" ?
My e-mail address is anthony.burgess@cwcom.cwplc.com
Kind regards
For sale; Micro-Dynamics smooth cut adjustable rev limiter, fitted to De-Dion pedal box cover ( idea for connections to coil/ignition ). Perfect working order, but now no longer required as 3D ignition installed
Offers please
Anthony.burgess@cwcom.cwplc.com
07714 835983
I have the following parts from a low milage 1990 de-dion which I have owned from new ;-
1. Wiper assembly, washer bottle pump and jet
2. Heater assembly, inclding hose and heater control valve. All ready to fit
3. Flared black wings and supports
4. Wind deflectors ( perspex ) to fit side of windscreen
Contact
Anthony.burgess@cwcom.cwplc.com
07714 835983
If you take the primaries one at a time and a small round file ( avoid any with corners ) and tape the appature to avoid flaking paint, this should be straight forward. Size should not be significantly larger, just take it one step at a time
Regards
Wacky apologies, having checked high ratio rockers are not appropriate for use with my 264 and are ideally for shorter lift longer duration cams.
Best regards
I am looking for a SLR and to fund this will need to sell my muchcherished and developed 7.
The car is a 1990 DeDion, owned by me from new and is on a Q plate (Q62MPU).
Specification includes ;-
6 speed
Paddle clutch
Skeleton flywheel
Roger King all steel unleaded cross flow on 45's (644 Cam)
Webber Alpha 3D ignition system ( from Roger King )
Aero screen on Caterham stanchion
SLR wheels on ACB 10's ( inc spare 7.5" front )
Wide track R500 front suspension
Dry sump
Oil cooler
Carbon central rear view mirror
6 point harnesses
Cloth seats
Stack rev counter
Adjustable Leda's on front ( supplied by James Whitting
Upgrade front and rear springs
Bilstiens on rear ( non-adjustable )
LSD with 3.62 diff fitted ( matching R500/SLR spec )
Lowered front wings
4 into 1 exhaust with repackable 7" Tech-craft silencer
Quick rack
QR mono wheel
The engine (7K), gear box (2.3K) and suspension are all recent upgrades. Engine has only recently been run in and set up by Roger on the rolling road, with a conservative 145 BHP at rear wheels on 8.5" rear wheels.
The car has done less than 2.5 K miles and is not used enough.
Photo's can be e-mailed along with full spec list.
I have the following which need to be cleared from my garage ;-
1. Standard steering rack ( 2000 miles only )
2. Black flared wings and stays
3. 3.32 Crown wheel and pinnion ( not used ) may well suit bike engined car with de-dion set up
4. 3.92 Crown wheel and pinnion - ideal to improve acceleration on standard 6 speed set up
5. Heated windscreen ( not black )
I am located near Cambridge but could deliver depending upon location
I have a heated screen inc stanchions( not black ) if anyone is interested. £100
I am located near Cambridge but regularly travel around UK so may be able to drop off
Regards