The Pikey

2005 helmet sold to Dave. 2010 helmet still available unless Danny confirms he wants it. Jason Edited by - Jason Fletcher on 2 May 2014 13:59:08

all done. Thanks Roger. J

Racelidz Snell SA2010 helmet used for one trackday and hoon about at Curborough. Perfect condition size XL £90.00 collect from Stoneleigh. Racelidz Snell SA2005 helmet size large. more used than the one above, the Kevlar strap is a little grubby but other than that it's unmarked. £60.00 collect from Stoneleigh. SOLD Dave Momo race suit in blue. Momo size 58. I'm 5'10" 42' chest and a perfect fit. It's in really good condition. Not sure what the spec is but this is what is wrote on the back. " Standard 8856-200, RS.023.02, FIA, year of manufacturer 2005. Also on a different label Nomex 111 27% Vicose Visil 27% mobacrilic 18% polyacrilonitail 28% Then an a big label EOEO. Hope that tells someone what it is. Condition wise it's not faded, perfectly clean. Looks like it cost a fortune new. £100.00 collect from Stoneleigh. I will be at the show only on the Monday morning but I live only 1/2 a mile from Stoneleigh so collection on Sunday is OK too. Jason Edited by - jason fletcher on 2 May 2014 09:53:54 Edited by - jason fletcher on 2 May 2014 13:58:37

test

I think adjustable platforms are the way to go. Or a nice set of Nitrons 🥰 🥰 ... Sorry..

you need to measure at the rear of the wishbone. The rear wants be be 15mm higher going by the book. I found when using a LSD it needed another 5mm. Jason Edited by - Jason Fletcher on 13 Mar 2014 21:04:31

Are the front wishbones parallel to the floor and is the rear 15mm higher than the front measured between the the chassis and floor under the rear of the lower front wishbone and between the chassis and floor where the rear wheel arch meets the body? I'd set to the above and if no good raise the rear about 5mm and see how it go's. J

I think the type of plug you are looking for will look just like the one that plugs into the rad fan (two female spades one up and one across) I'm guessing the one have is an econseal type? I would pull the wood forward floor out and see if it's under there. J

I think you will find thats a plug for a raised brake light which would explain why it's not live.

What colour are the wires you have located?

I'd go direct to Webcon here Jason

Ah right. I'm still thinking that a structural polyurethane from a car body shop would work well but Hysol 9462 will also do a good job of this. The Hysol would work even better if the aly angle had a series of holes down it's length. Jason

Guy What is that shape and size of that parts you are gluing. i had it in my mind you were gluing sheet to sheet for reason. Alternatively I have a Henkle product here called Hysol 9462 which we could glue a test piece if you are passing my way. Jason Edited by - Jason Fletcher on 2 Feb 2014 08:43:31

Is epoxy really the best adhesive to use? Unless there is a really good key the epoxy won't stick to aluminium too well and also normal epoxy don't like heat. I think I would be seeing if a contact adhesive like Thixothix would work better. Jason

It's yours then. I live right next to Race Retro so I'll get it home and you can collect it then. Jason