hi chaps
i'am still trying to resolve my warning light issue. i dropped a email to caige to get the tacho wiring diagrame, and they advised me to put a resistor because the probleme may be that my alternator is not build to be connected to a LED warning light
here is the answer from caige:
Hello,
Some alternators need a bigger load to switch, ie they have been designed to
switch a lamp on and off, rather than a low current led.
Please obtain a 68 ohm, 4 watt resistor and connect it between the warning
light input to the speedometer, and switched ignition.
This should allow the alternator to correctly turn off your led.
Best regards,
Ian
i have bought the resistor, but i really don't understand where it should goes.
can anyone point me toward the right direction?
cheers