tgracing

CSKIP, B*lls! I'm after a Dedion one, sorry for the false alarm. Cheers, Davebo. Edited by - davebo on 26 Feb 2003 16:12:01

Anyone got a de-dion FIA rollover bar surplus to requirements ? Thanks, Davebo. Davebo C7 CAR

If you're talking rear wings use plastic bolts and 2 plastic nuts on each bolt. I believe M6 is the correct size as there are a couple of blind holes (rivnuts ?). I did this on my car and they popped off a treat without damaging the skin. I even managed to re-use the bolts after. You can get them from most fastner places and they cost £b*gger-all. Davebo C7 CAR Edited by - davebo on 12 Aug 2002 14:41:17

Other than baffling (short term), Dry Sump is the way to go. In the meantime you can overfill a bit, but it will 'slosh' (I think that's the correct technical term). Davebo C7 CAR

Try Vehicle Wiring Products too. Davebo C7 CAR

Depends on the age of you car. Most std seats just bolt through the floor. There are channels under the floor to reinforce it which should be pre-drilled. The rear bolts require jamming a big screwdriver into the rails as there's b*gger all room to get a spanner on the head. HTH, Davebo C7 CAR

Mine has a little bit of play fore and aft, but other than that it's rock solid. I think that's normal. Any sideways play suggests either worn splines or play lower down. Davebo C7 CAR

So, how the divil are you supposed to flush the system and refill it with the right concentration of stuff (Coldstream pre-mix in our case) ? Cheers, Davebo C7 CAR

Graeme, thanks for the info. I'll double check with 750mc, but I expect you're right. I have 9 signatures in total, but 6 of then are from speed events, so I guess they won't count. Getting another 7 signatures between niow and October would be 'challenging'. B*gger! ☹️ Checked with 750MC and Graeme is exactly right. Double b*gger! Davebo C7 CAR Edited by - davebo on 9 Aug 2002 13:09:53

Graeme, Er, no. @rse! I'm still a novice 'B'. B*gger all chance of getting the extra signatures now. How come it needs a class A ? Davebo.

I'm after a car I can use for the Birkett relay in October. Anyone got a car suitable for a race meeting that they are willing to hire out to an 'in it for serious fun not serious contact' type racer ? If so, please call me on 07801 671907. Thanks, Davebo C7 CAR

Heater valve ? Is that still there if you don't hasve a heater ? Thanks again, Dave.

Oh, one more question...would what's in the pump make up the missing 2 litres ? If not, where the heck is the missing fluid ? OK, just one more. If the collected wisdom is not to fill the tank up to the fill mark, just how much should be in the system ? Cheers, Davebo C7 CAR

There's a thread on For Sale about this. The 'Chatterbox' intercom can be used with helmets or without (allegedly - I've never used one). I believe they are very similar to the ones Maplin sell for a tenner. I use an Oxford bike set, but they can only be used avec un helmet. Sorry. Davebo C7 CAR

I'm in Yorkshire (Leeds), the car is outside York. It has to be a no risk job, so it will have to go in. The fan switch I can do. Cheers, All. Davebo C7 CAR