Jump to content
Click here if you are having website access problems ×

Budjuggler

Member
  • Posts

    6,320
  • Joined

  • Last visited

Everything posted by Budjuggler

  1. He must have splashed out on a new one! That's upgradeitus for you
  2. Just to clarify as Craig is not known for detail ReHaB = Reading, N Hants and Berkshire Meet at The Barley Mow, Winchfield Meetings 2nd Weds and last Thurs plus AWESOME on third Sunday at The Old Hatchet nr Ascot
  3. Available at all good border posts
  4. Slick Mike H but only one cycle wing!
  5. Uh oh, he's wondering how he's going to pay for the upgrade
  6. I have just switched to Toyo R1Rs and, following a three day blat round Wales have been very impressed. This was a change from my usual R888s and, to be honest, could not tell the difference in performance. Oh, and by the way, they are £65 a corner
  7. R300DS in car park
  8. Twice around 7.30
  9. 205/50/15 about half used so still plenty of tread. How about £25 each?
  10. Just had a set of R1Rs fitted. The ReHaB Welsh Blat should tell me whether they are any good
  11. So, presumably you are paying for this?
  12. Just ordered a set of R1Rs. Will report back in die course. Aftet they have arrived from Poland via Oponeo. ..
  13. I compared my back end to the others No change there then. And yes your bum did look big in that
  14. Mark - you could well be right! Thanks for the advice chaps Which wheel will the sensor be on? Edited by - BudJuggler on 6 May 2014 12:34:35
  15. I have a ST8120. The speedo readout is fine up to 82moh. After this, in the high 80s it will flick between the actual speed and a random number in the low 80s. Any higher and I just get random flicking between numbers ranging from 60s to 90s. Has anyone experienced this or have any suggestions?
  16. I am currently looking at Toyo R1Rs. Some people on here use them and the price is quite (very) attractive
  17. In northern France. You may have been surprised to see a clutch of Caterhams On our way back from a track day at Folembray
×
×
  • Create New...