in the middle of tiding up the wiring, currently run the map switch from the aux d connector , but I would like to wire it from the multi plug does anyone know the emerald pin number?
thanks in advance
frank
looking for info on the innovate lc1 lamba sensor
On my way to powerspeed yesterday the readings started to read high and just before Ashford i had an error message E 2, which according to the innovate website its an open heating circuit.
I did not have time to investigate if the wiring is faulty so was looking at buying a new sensor, as i collecting the 7 next weekend. so the question is what is the correct sensor does anyone have a part number or a sale contact
thanks in advance
Frank
hi
i can pick then up from nameric and bring then up to l2b
just to check 2 bolts 3/8 UNF 4 1/4 length are you sure only 2?
ill leave them with the sossiges team. hopefully they wont bbq them
regards
frank
don,t have ss cams but a pair of vvc exhaust cams as noted in Dave Walkers recent article, check out the emerald site for walker workshop articles. he states about 20 bhp with a remap.
whip the seats out, find a local welder, have the 4 bolts tacked to the runners touch of paint, refit tighten nuts. down the pub for a pint, seats can then be removed and refitted in minuets.
alex
have a look at hein gericke i believe there is one in Southampton, i brought a optimate a few years ago at a cheaper price than on the high street / accessory shops the also do a variety of chargers and leads
regards
frank