Jump to content
Click here if you are having website access problems ×

masiwn

Member
  • Posts

    66
  • Joined

  • Last visited

Everything posted by masiwn

  1. masiwn

    Anglesey

    I have been neck exercising all winter , so one for me please.
  2. I f there is still a space left I would like to book one please. thank you Aled
  3. Hi Justin, If there are any spaces available could you please add me on. Thanks Aled.
  4. Hi Richard, I would would very much like to join you on the test day. Thanks Aled
  5. Thanks Graham, but also to far for me midweek. Cheers Aled
  6. probably to late seeing this post,but if any space becomes available for Curbrough I definitely need the practice. Thanks Aled.
  7. Hi Chris, sorry for being so late,if there’s still room for two more could you include Teleri and my self. Thanks Aled
  8. Is it still possible to go on the reserve list please Thanks Aled Garner
  9. Thanks for the replies, I’ll drain the oil and re fill with new. How much oil should I be putting back in ,I have an apolo tank fitted. Many thanks Aled
  10. Hi I have check the oil with the engine running ,I don’t think it’s high I find it’s such a job to tell. The temperature does drop when I drive through a 30 mile limit. Noticed tonight going round right hand corners up hill that oil pressure needle was flickering a lot
  11. Oil was changed in may 5-40 fully synthetic. Ordered sender from redline.
  12. Hi I have check the oil with the engine running ,I don’t think it’s high I find it’s such a job to tell. The temperature does drop when I drive through a 30 mile limit. Noticed tonight going round right hand corners up hill that oil pressure needle was flickering a lot
  13. I have oil and water temperature sharing the same gauge just flick a switch to determine which you want a reading of. Lately my oil temperature has been running very high 100 to a 110 on normal road driving after about 20 miles ,my water temperature stays normal. I have replaced the sender which is fitted to the appolo tank over the weekend but just the same tonight. My engine is a k series vvc. The Cuborough sprint is coming up this weekend and I am bit worried. Does anybody have any suggestions what might have caused this to come on all of a sudden. Many thanks Aled
  14. Hi Chris , if there is still space can I be added thanks Aled
  15. I have had exactly the same problem for the last two or three months, your discription is identical to what I am experiencing. I have not had it looked at yet but was thinking of starting with the A frame bush. It will be interesting to see how you get on. If I have any luck I'll let you know. Aled
  16. masiwn

    water temp

    Hi, did a track day at Llandow Saturday, on the journey down water temp was normal but once on track would fall back to zero, on the way to the petrol station it reached normal but back on track after 2 or 3 laps would fall back to zero heater stayed hot and water level was good. is it likely to be temp sender or some thing I should be worried about . 1800 vvc thanks Aled
  17. Hi someone was kind enough to lend me a clutch cable I gave you my email address so that you could contact me in order for me to send you a new cable. In case you lost my original address, i can be contacted at aledplastering@aol.com
  18. masiwn

    running cold

    Thanks for all the replies I have replaced the thermostat been for a spin and everything seems fine plus I did'nt strip any threads or get help to finish ,dare I try another job or quit on a high Thanks Aled
  19. masiwn

    running cold

    Thanks for that, did not fancy having a go at the thermostat do I need to jack the front up to bleed. Aled
  20. masiwn

    running cold

    Thanks the thermostat has not been taken out, The air from the heater also seems to cool when the temp gauge falls does that give any clues could the thermostat be stuck open?
  21. masiwn

    running cold

    my 1800k series will come up to normal temperature on water gauge while idling but once on the move it drops back gradually to zero if I pull in and let the car idle the temperature rises again the fan only cuts in after the temperature gauge goes above 85 any ideas Thanks Aled
  22. If you are poppong and banging on the overrun then you almost certainly have a leak in the headers. Check the exhaust gasket and seal any joints with high temp silicone sealant. MY car has started doing the above what do mean by headers. Thanks Aled
  23. IT was Wynne (yellow 7)and my self Thought you were warning us of a camra, We were heading from Tregaron to Talyllyn for supper and back via dinas mawddwy. Do you live in that area.
  24. Can any one help, my caterham has developed a problem starting, At Le mans when hot it would not start we would move black lead on solenoid and it would start so on Tuesday I changed solenoid, car is now worse occasionally starts first time as normal but most of the time it just clicks when turning the key if I keep turning the key it firers on the fifth or sixth click I have taken the starter to Lucas who say its fine
×
×
  • Create New...