Jump to content
Click here if you are having website access problems ×

K7 VCT

Member
  • Posts

    1,481
  • Joined

  • Last visited

Everything posted by K7 VCT

  1. Will ask a friend who might like this if uts still available
  2. The vosges area has some great roads and scenery 👌
  3. I didn't want to be the first to sayso
  4. Sounds interesting...keep us posted. Been to Europe 5 times in the 7, never tire of it...... Possibly meeting up with some local 7 members over there too ?
  5. Ah so the wires are protected, 👍 the better photo shows it.
  6. Interesting the cam solenoids at the front of the engine don't have sleeving on the wires.......
  7. You will find ebay has a few sources of them.
  8. Interesting, I've never heard of that ECU make. What do you want for your old 310 mapped one ?
  9. I may have a use for your old ECU
  10. So what ECU have Northampton Motorsport fitted ?
  11. Be sure to check the ecu earth to the side of the battery tray, if it loose or poor connection you will get a terrible running car....
  12. I think it was Ian Payne at PTsports cars in Maidenhead
  13. My sigma is a Ti-vct engine also.... my car kept running....
  14. I had my speedo sensor blow a fuse. The car runs perfectly fine. However the instruments are dead and the indicators except hazard lights are dead as they go via tell tale in the rev counter. Nothing to do with fuel pump, I drove over 100 miles back from.the Taffia run .
  15. Just put a small pice of black tape over it. I used a hole punch form paper to stamp.pne out of so tape .... it perfect now
  16. Check the earth by the battery for the ecu......
  17. Basically on the bulkhead behind the drivers seat. Cable tied neatly
  18. My factory build one is in the boot to cockpit area. Easily accessible
  19. I had the check done with Martin before buying my 7. Nice to get extra information
  20. Try premierpowerengines.com, Stuart may have spare one
×
×
  • Create New...