Jump to content
Click here if you are having website access problems ×

johnpbransfield

Member
 View Profile  See their activity

  • Posts

    548

  • Joined

  • Last visited

 Content Type 

Everything posted by johnpbransfield

  1. johnpbransfield
    Just like to echo Steve's post. Very enjoyable year and looking forward to 2016.
  2. johnpbransfield
    No worries Chris, hope you get sorted OK.
  3. johnpbransfield
    Hi Chris, Not leather seats but I do have headlight brackets and wing stays from a 2009 metric chassis which you are very welcome to have FOC (just postage costs) The headlight brackets are in vgc but the wing stays will need a coat of paint where they are drilled through.
  4. johnpbransfield
    Out for a drive yesterday when there was a noise from NSR. On inspection I found that the Rear ARB bracket had sheared where it attaches to the drop link. The car is 6 years old with 11K on the clock the setting was on softest. Are these prone to shearing or is there something I need to adjust before fitting the new bracket. Measurements on both drop links are the same and the drivers side looks fine. I am certain I have not hit anything and there are no tell tale signs around the bracket area. Thanks in advance for any advice.
  5. johnpbransfield
    Tom, with the leather seat swab you place the crotch straps on top of the seat and sit on them, no need for a hole in the seat.
  6. johnpbransfield
    If the aluminium rings are of the hole type, a couple of stubby screwdrivers do the job.
  7. johnpbransfield
    Chris i was at a club TD earlier this year and Steve Causey camped the night before, but worth a double check. I think loos / showers were open too.
  8. johnpbransfield
    Clive, "a bit of cosmetic surgery".........in your dreams!
  9. johnpbransfield

    Nitrons

    johnpbransfield replied to TomB's topic in For Sale

    Simon at Meteor may be worth a call Tom
  10. johnpbransfield
    Anyone know if the ESV will be in attendance on the Curborough weekend?
  11. johnpbransfield
    Entry sent Chris
  12. johnpbransfield
    Mark D ....come round with me.....simples!
  13. johnpbransfield
    Thanks for the heads up Simon. How did I get on.......I can't remember !
  14. johnpbransfield
    My CC aero fitted fine on my imperial car (2005) but not on my metric (2009) I fitted the the aero in position with the poppers (where the tonneau fits) then drilled two holes in the aero to match up with the relevant holes in the scuttle. Good tight fit now though I do have two unused original holes! Hope this helps.
  15. johnpbransfield
    Thanks for the replies but now sorted thankyou
  16. johnpbransfield
    Thanks for the feedback. 7" screen maybe OK Mark D as I now have glasses (although I dropped them at Aintree and were crunched into the gravel when I found them!) Have an iPad which plays back fine though the wife won't let me take it away! Hence the need for something cheaper just to play back at events between runs. Not very computer literate but would a Samsung Tab 2 play back better than a Tab 1 or is it to do with memory capabilities etc? Thanks.
  17. johnpbransfield
    can anyone suggest a cheap second hand device (laptop, tablet thingy) to play back a Sandisk micro card from a camera at events so I can see where I am going wrong. Doesnt need to work as a computer, just needs to be able to download and play back.....preferably the same day!
  18. johnpbransfield
    Looking for a base with stem to fit central mirror on a Caterham Aeroscreen. I understand that these are made by Spa Design. If anyone has one spare. Thanks in advance.
  19. johnpbransfield
    What size is the centre mirror? first dibs if it is a wide one please
  20. johnpbransfield
    The bearing looks good and clean so I have re greased everything ready to reassemble. Thanks for your help.
  21. johnpbransfield
    Sigma 150 with 6 speed box and hydraulic clutch. Is it possible to adjust the hydraulic clutch? If yes, is there a sequence ?
  22. johnpbransfield
    Just had the gear lever off to grease the bearing. Do I need to grease the selector fork at the foot of the lever or should other parts be kept free of grease. When I took it off the fork and surrounding areas where grease free. Thanks in advance
  23. johnpbransfield
    Nick, Another Brooklands up on PH in Kent...if your quick!
  24. johnpbransfield
    Soft bits for Sevens do one which is attached with strong Velcro and good quality.
  25. johnpbransfield
    Set of headlight brackets for sale from an S3 Metric Chassis (2009) These are not the lowered type and are in very good condition. £20.00 plus postage.
×
×
  • Create New...