Tonmawrie

Hi, has anyone carried out the above, mine is vaux hpc, appreciate suggestions regarding whats involved re tank, return lines etc.Also, if anyone has got suitable bits for sale. Thanks in Advance

hi richard, can you give me details for payment please. thanks jeremy

My original plan to buy a Sigma and then upgrade has been foiled by be buying a HPC instead so now am looking to let the above items go for the right price. The throttle bodies are a work of art and details can be found at http://www.atpower.com/products/ford-sigmazetec-se-38mm they are currently attached to an engine in a sylva Riot so can be seen in use if needed. They can come complete with throttle sensors etc and airfilter should give 150bhp to a standard Sigma but correct me if you think this is optomistic. I have also got a specialised engines typhoon ecu to go with the TBS but may keep this as it's transferrable to the VX. The engine again, Hi spec, consisting of base sigma with steel rods, PEC pistons rebored to suit and pistons pocketed to suit valves/lift, reground crank with with competition bearings all balanced. Head has been modified and ported and came from Paul Collingwood, I believe his uncle is an engine tuner so he carried out the work. The head has Paul Ivey stainless oversize valves, max size for a Sigma, with competition springs, mid range cams. All been rebuilt with new gaskets etc and sealed since collected.Paul Collingwoods engine of a lesser spec fitted with the same throttle bodies but standard valve head can be seen at https://www.youtube.com/watch?v=rOdwjYP3rnk. Also got a standard zetec se with 5000 miles in the car so can be tested and also a set of arp rod bolts for a sigma and some other sigma bits and pieces( standard its) I know youre supposed to list with prices but its a difficult one so open to offers. Thanks

Hi anyone interested in the above number plate? I've got my own plate to put on so if suits someone's initials I'm open to offers. Also got R10TSE, which is on a RIOT but could be RIO TSE or R1 OTSE, again, any interest please get in touch. Thanks Jeremy

Hi Guys, has anyone got best suggestions and sources for replacement smaller headlights to replace my existing 7 inch while I'm doing the bracket change. Thanks Jeremy

Hi Neil, apologies for the delay, payment sent through. Thanks Jeremy Hurley

Hi, looking for a set of throttle bodies for a carbed hpc so any other bits that might be needed i.e. fuel pump modified tank etc. Thanks Jeremy

Hi, can you send me details for payment please and is there a photo of before/after to take a look at please. Thanks Jeremy

Hi ian, tried ringing but no luck, if you can contact me on 07870612840 Thanks Jeremy

Hi,anyone out there either got a fibreglass low back caterham seat in good nick or a pair of high backs to fit a caterham,cash waiting. Thanks Jeremy

Hi,could I have some photos please. Thanks

Hi,yes,if you could please email me some photos or if you know somewhere,like the caterham site where i might be able to view similar. Thanks Jeremy

Hi did you sell your seats or are they still available,if so can you email pics. thanks jeremy

Hi,are they still available and what colour are they. Thanks jeremy

Hi,anyone got either a good condition caterham fibreglass low back seat or a pair of seats in black,caterham or other make,leather or vinyl,the shape in my 93 car would be ideal,not sure what theyre called,email me or tel.on 07870 612840,able to collect and pay cash. Jeremy

Hi,can some one give me the procedure for chaning from inerta reel to four points in a caterham please to save me the hassle of trying to guess and ending up dismantling the car. Thanks jeremy

Hi I am in the process of installing an R1 engine,any one got any advice or knowledge of what to do with the exup valve from the original bike exhaust. Thanks jeremy

Hi could you email me with the reduced price. Thanks jeremy

Hi,could I have some pics as well please. thanks jeremy

Hi efa,could you email me with prices,pics Thanks jeremy

Wanted large or xlarge irvin,not too particular on condition as its only for car use. thanks jeremy

wanted cycle wings and wingstays for prisoner type wheels. thanks jeremy

Hi,can anyonre reccomend the best replacement leads for the above engine,Im doudting the condition of mine after observing quite a weak spark at the plugs and problematic starting. Thanks jeremy

I am currently having trouble with my hpc starting if left for more than a few days.It turns over okay but doesnt seem to want to fire,and it will only fire with no throttle,if given any throttle at all it has to be left to clear before attempting to start again.Its got throttle bodies and mbe ignition.Ive put in new plugs but may also change the leads as these are now 12 years old.any suggestions before I take it for a diagnostic check through.Also,any reccomendations as for replacement lead seats. Thanks jeremy

Hi,could I have some photos please. Thanks jeremy