Jump to content
Click here if you are having website access problems ×

Swiss_Tony

Account Inactive
  • Posts

    1,033
  • Joined

  • Last visited

    Never

Reputation

0 Neutral
  1. Thats great Thanks
  2. Thanks. It may be the same.Only basing this on them looking similar! Would you be able to measure the inlet pipe and the length at all? Maybe a pic? And could you post it? Not sure if it would cost a lot or be hard to package etc
  3. Swiss_Tony

    Silencer

    Wanted exhaust silencer to fit a vx (not sure if they are the same as the k series) Preferably near surrey/south east
  4. I have had a few emails and the general opinion seems the price is too high so now reduced. James Su77on Se7ens
  5. 2 Mog carbon rear arches. 55mm wider than standard to allow for 10" wide rear wheels to be fitted. Passenger side one is slightly shorter to allow for exhaust clearance. Brand new still in packing. £offers Call David Edmands on 07825 122961 James Su77on Se7ens
  6. Set of standard track front wishbones for sale. All in good condition with bushes,top ball joints also ftd. £100 ono James Su77on Se7ens
  7. Stack dash for sale. Model no:8130p with black dial This is not the Caterham branded one and has all adjustable functions, predictive lap timing etc and I think can have a lap timing beacon connected too. Its the road legal one so has speed,odometer,tripmeter,fuel gauge etc In very good condition Rev counter is 0-4-10000rpm Loom is complete as supplied from new ie not shortened Comes with all sensors for oil temp,water temp,oil pressure,fuel pressure,wheel speed sensor with bracket for fixing to front caliper,switches,external warning light for low pressure/high temp etc basically everything needed to fit it 😬 If you look at the Stack website it will tell you a lot more than I can 😬 Also have a RIF carbon dash which is not the best as it has had different switches etc fitted to it so has quite a few holes but is usable. The odometer has iro 5500 miles on it I cant find the manual but I think these are downloadable from their website. £550 James Su77on Se7ens Edited by - james on 11 Oct 2010 15:28:48
  8. My 7 started out as a standard carb'ed car with screen,wipers,heater etc. The main bits of the loom eg lights etc are still in use. I have changed to injection (dta ecu) and a stack dash. So the ecu has its own loom,the stack has its own loom and the car has the standard loom with a few bits added ie fuel pump wires and there are a few unused bits. Its a bit of a mess but not that bad. I was thinking of making my own loom to incorparate all the additions and leave out the rest which would sort it out nicely as there is nothing which is close enough to be neat What ecu does yours use? Have you had a look at a k series r500 loom? Just thinking if you use an mbe,stack etc its quite a neat way of doing it. The engine side would not be that different and you could change connectors for crank sensor,injectors etc quite easily and also add on any extras. Good luck 😬 And dont forget to take some photos to give us all some ideas James Su77on Se7ens
  9. Thats a much better way of putting it 😬 James Su77on Se7ens
  10. I am not usually one to criticise on the use of the english language but you clearly dont understand the meaning of the word "upgrade" James Su77on Se7ens
  11. ric Thats good news 😬 I am not entirely sure that a new crank sensor will sort out your other issues ric I have no personal experience in this field but my recommendation would be to start wearing mens clothes again and maybe it will feel right after a little while. Hope that helps James Su77on Se7ens
  12. ric I was not entirely sure where it was for a bit 😳 You plonker 😳 As soon as you get home get it on the car and give it a drive 😬 James Su77on Se7ens
  13. ric Have you not tried it? I assumed that you had! Well worth a go as they can cause wierd problems. Silly question but have you got it Old age is getting the better of me and I cant remember where it is James Su77on Se7ens
  14. Mr Aves Just reading this and unless i have missed something have you changed the crank sensor? They can do really odd things sometimes! If you have not got it the Bosch metal one tend to works better imo as I have had all sorts of problems with the plastic ones. If you have not tried it I have got a good bosch one you can try and see how it goes. James Su77on Se7ens
×
×
  • Create New...