Gary Stone
-
Posts
1,365 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by Gary Stone
-
Awfull 😔 😔
-
What you need is a nice new lens to photograph the traps in action A snip at £3500 or should I say a Snap 😬
-
Canon EF 500mm f/4 IS USM Lens for sale. Inc carry case,lens hood and Hood cover. All in very good condition with only a few marks on the body. Optically Perfect. Its not had a great deal of use.
-
May be interested in a silencer depending on price
-
Ahh! I think your right aeroscreens. My mistake.
-
Hi Jaffa7. The tyres are date stamped on one side of the tyre. If you find the profile markings ie 175/55/13 you should find the date stamped as a 4 digit number relating to month & year ie 0410 is April 2010. On my tyres it is directly under the 55 bit of the profile so guess should be same on all CR500's.
-
Thanks SM25T but I have sorted one now.
-
Raise the car M25T!! and ruin the ground effects 😔 😬 Thanks to all for your reply's. I have now found a sump.
-
Q ☹️
-
Looking for a wet sump for a K series. Mine is almost done in. No finns left & cracked. It will probably only take one more grounding to finnish it. Anyone gone to a dry sump system & have one of these in good nick lurking in the corner of their garage.
-
today 4.30pm near Fawkham green, Kent.
-
-
😬
-
What can I do with my carbon fibre when it gets like this?
Gary Stone replied to Shad's topic in TechTalk
Turtle Wax Extreme tyre wall gel works well for me. -
yup..was me Peter. remember seeing the wave to.
-
Duckpit. Make sure they are wheels for the right live axle. Marina or Ford PCD.
-
Green SV with yellow wings & nose cone at the Oak Dene cafe Wrotham Heath. 10 ish.
-
I took the advice given here & fitted the Gates Cam belt & tensioner. Good to go now. Thanks all Gary
-
Gates belt & manual tensioner all ordered & ready for collection this afternoon. Lovely Jubbly. 😬 Thanks every one.
-
Thanks Oily. I think I will order the Gates belt. I did also think of changing the pump. But think due to the low mileage it should be fine.
-
Thanks Oily & every one else for your valued comments. Just one last thing. I know Oily, that your advice is to use a Gates cam belt. The guy that will do mine is a mechanic for Rover & is intending to get the parts from there, all original Rover. Can I take it that will be fine or is the Gates version that much better.
-
Martin. I still have the sump foam in. But it has been changed at some point in its life, just not since I have had the car. Batteredolsupersport. I just thought it might be a good idea to change the tensioner while its apart. I will check it out first though.
-
Does any one know if the tensioner on the SLR is self adjust type or not.
-
Yes, be quick...It's not a messy as you might think, but do lay plenty on old cloths down first. I also primed the new AP unit with brake fluid first,pumping the piston till it came from the connection holes. Did the swap as quick as poss & didn't even have to bleed the brakes after.
-
Ta..M25T
