David Ward

I'm 6'2" and not slim... - lowered floor (crucial) and despite your comments try Tillets (mounted directly on floor, or there is a new slim line set of runners direct from Tillet) as I fit very snugly and it works for road and track. Normal round s.wheel is then fine.

No, got no serious response so it's still sitting here as I haven't got round to advertising elsewhere yet. Call me on 07970 503654 if you're interested. I can email you some pics if you want. V7 HPD

No, it's an ordinary Minno as described. V7 HPD

Original Caterham K series Titanium short (20" x 6") R500 silencer with long collector (no cat). Fits the big bore R500 primaries (not included). It's the one pictured in the CC online store under "exhaust, rover" and incorrectly labelled as "4-2-1 side exit non-cat R500 road". It is a 4-1 system. Bought new 2002 and used for only a few months before being replaced with a quieter can for Goodwood sprints. Always thought I'd change them round between events but never got round to it, so it has sat in my dry garage for 7 years. Excellent condition, no grounding or scrapes, nice and shiny! Oh and it sounded awesome... £450 07970 503654 V7 HPD Edited by - David Ward on 4 Aug 2009 18:28:05

Still available - happy to entertain reasonable offers. I think, and I'm sure someone on BC will correct me if I'm wrong, that an SV does not fit a Minno. V7 HPD

As above Owned by me since '02, kept in garage. One owner before me (I think it was new in '01). I had a Brian James 4 jerry can storage box and high level tyre rack fitted in '03 or '04. Serviced fully in '07 - never had any problems with it. Not used this year. Galvanised, wheel chocks, heavy duty jockey wheel, long ramps, electrics all work, tyres are fine, locking cable for the tyre rack, spare wheel, manual winch Some of the wheel arch mouldings are a bit out of round and I just noticed that one of the number plate lamps has come a bit loose. Can send pics if you're interested. Can be viewed in West Byfleet (Surrey) or down the A3 in Liphook. £1200 or near offer Blatmail or 07970 503654

Hi I've got the original tank from my '99 1.6K sitting around. It was swapped out for a bigger endurance tank and has been sitting around ever since,was working fine before it came out. Interested? Offers about 50% new price. Blatmail or 07970 503654 V7 HPD

Nig Still getting the email bounced back - something about "spamhaus" whatever that is! Phone me on 07970 503654 V7 HPD

Nig Tried responding to your email but it was bounced back... V7 HPD

9" wide as new original DITP front wings. I bought them a few years back as spares and now I'm racing I'm more into cheap f'glass! Never fitted/drilled/glued etc.; still in original plastic; cryogenically preserved (OK carefully stored indoors...) Those of you in the know will be well aware of the high quality of these items 😬 Super shiny and not seconds. Can send photos. £290 - suggest collect, or meet me at a racetrack. V7 HPD

Ah the Pig's Nose - should be dropping in at the weekend 😬 In-laws have a place in Strete.

Sounds good - nothing on the CSCC website yet but I'll keep my eyes open. Add these dates to SEMSEC and there are going to be some animated domestic discussions in the Ward household... V7 HPD

Hi Nigel So just time to fit in the Autosport show, an engine rebuild and a gearbox refresh then off we go again! V7 HPD

S & T Electro-Plate in Bristol (google them) did a fine job on my old Laverda and have a good reputation V7 HPD

Are our standard nuts M12 x 1.5 or M12 x 1.25 ? V7 HPD