Merrick Linnett

Hi John, I have a spare VHPD MS2 Head. Its used BUT Has a small crack in one of the inlets. Can be repaired. Merrick

Quantum Dampers Mmmmmm!!!! Work very well with Freestyle set up. The best I have used on Track. Speak to:- Simon at Meteor or Laurence at Quantum Merrick 69

Cheers Chaps for the advice. Merrick (69)

Thank you Jonathan and Mark. Thats spooky I was looking at the Venhill site. Would you know if the cable is the same as the MG Metro? Just looking on the Rimmer Bro site. Merrick (69)

Is there another supplier for a S3 K series on Roller Barrels Throttle Cable ? Caterham seem to be Out of Stock. Cheers. Merrick (69)

Thank you Simon and Roger. I'll have a look on Ebay and Rimmer Bros. Merrick (69)

Where can I buy a set of Injector O rings? Injectors are the white R500 K series for Roller Barrels. Thank you for any information. Merrick (69)

Still For Sale. Merrick69

That will be fine. They are really great guys and know their "Stuff". I work down the A29 from Quantum in Fontwell. Merrick69

Hi Mike, I do have the pushrod suspension on the front. The clearence is fine compared to the Nitrons I've used and no remote canister to mount. Pat and Laurance(L7Club member) at Quantum have been very helpful. Working with the spring rates I've been running. Merrick69

Hi, I have been running this Ultra wide set up front and back for about 6 years. On the Track I find the car can carry a higher corner speed especially at the Apex. Cooler front tyre temps, able to run a softer compound. On the road I have not noticed much different from STD set up. Not that I cover many road miles. The Quantum dampers have made a big difference to feel of the front end. Down side has been replacing the damaged parts. They are not off the shelf so take 2 ish weeks to have them remade. Merrick69

Hi Ken. I have replied. Merrick69

I have a Brand New Duratec/C400 race Car, Triple pass radiator still banded into its original packaging. Part #SKU0105K0001A Its 2 years old as I bought it as a spare for my race car. Would like to swop for a New K series Triple pass Radiator the #SKU73159 or Sell. £300.00 + P&P Merrick69

Thank you Paul, You have explained why I have 2 different sets off front pads in my spares. The Pads I'm using after a lot checking are the Pagid (CP7600D46 (2034) RS15.) Completely different from the pictures I found on the Pagid web site. But they work well and were supplied by Circuit Supplies in Luton. Thank's again for the information. Merrick 69

Evening, Could some one help me out? I need the Pagid Pad number for the Front Uprated brakes. EG 1265 or 2034. Pads I use are the RS14 or RS15. My spare set of pads are in my Tool box at work. Thanking you in advance*biglaugh* Merrick 69