ccconn

Pretty much anything from Festool, ferociously expensive but brilliant power tools that last forever

Hope you get it sorted. Once it is Im sure you will love it, they are fantastic when running properly

Thanks Aerobod, what torque are you tightening too?

Having read about a member who had lost some mountings on his diff housings because the bolt had come loose, I went to check my own. To my astonishment one bolt was missing completely and the others loose. Was wondering if anyone else had this issue? Chris

I think general consensus is that the Avons are a step on from the CR500's ​I have ZZR and ZZS and the ZZR is really a track tyre but I find the ZZS very good as a all rounder

Given the 620r has carbon interior panels you could ask CC and wait for the inflated price!. At least they would be cut to size though

As above VGC including splined shaft £50.00 + pacaking or pick up near Aylesbury Chris

I have a standard rad for a k series you can hve for £25 No leaks etc Chris

I have the following for sale: Brand new fitted indoor cover (Blue) with travel bag £50 Set of half doors in very good conditiion £100 SOLD Tonneau cover zipped down the centre £ 55 1 silver minilte spare wheel (tyre not in great condtion but rim is in very good condtion) offer 1.8 VVC EMU £50 VVC mech and cams - Offers SOLD I set of brand new rear discs - £30 All the above for pick up or P&P extra Chris

Just tried on home Mac and that seems to work Cheers C

Hi I have tried to Mail Jen but keeps bouncing back? I am just starting to think about putting mine on the market so might be quite timely The car is in awesome condition and very well looked after with Oil and plug changes etc. every year. Spec as follows: 16,500 miles 2000 1.8 K series VVC (VVC has been removed and hard cams fitted) DVA power conversion with Jenvey TB’s and Emerald programmable ECC + Bernard Scouse airbox All in approx. 185bhp Carbon Dash, Front and rear wings, mirrors SPA and indicators, Rear wing stone chip guards and aero screen ( Black pack Windscreen included) Exhaust by design 4 into 1 polished silencer Tillett seats and 4 point harness, in GRP but original leather ones included QR steering wheel Soft bits for sevens tunnel bag Keyless starting with JPE dials on dash and engine conditioner port Lots of other bits and pieces including hood and bag spare wheel bracket and side screens etc. Never been tracked and re sprayed last year in Porsche Rivera blue and Orange stripe including Caterham graphic down the sides ( Colour very similar to the 620R) Let me know if you’re interested Chris

1.8 ex VVC been DVA'd so about 180-185bhp How much do you want for it? C

Is it an in tank pump or external?

Looks like my in tank fuel pump has given up the ghost. Engine was running for a minute or two then stopped now wont start ECU on and going from red to green and Relays clicking over but pump not priming (Fuses OK) Ran a 12v supply to the pump directly and doesnt do a thing Anubody know where I can get one from as CC have been put of stock for ages Wll I need to go external and if so has anyone done it and recomend how? Thanks Chris - See more at: http://www.lotus7.club/blogs/fuel-pump#sthash.MKfa5WJA.dpuf

Looks like my in tank fuel pump has given up the ghost. Engine was running for a minute or two then stopped now wont start ECU on and going from red to green and Relays clicking over but pump not priming (Fuses OK) Ran a 12v supply to the pump directly and doesnt do a thing Anubody know where I can get one from as CC have been put of stock for ages Wll I need to go external and if so has anyone done it and recomend how? Thanks Chris