Jump to content
Click here if you are having website access problems ×

GaryK

Member
 View Profile  See their activity

  • Posts

    104

  • Joined

  • Last visited

 Content Type 

Everything posted by GaryK

  1. GaryK
    Hi Paul Am happy to take one off you. I'll pm you my email address if you could send me a picture that would be helpful. Thanks Gary
  2. GaryK
    Just got my notification, all working well 👍🏻
  3. GaryK
    Thanks Paul, no rush when you have time.
  4. GaryK
    Keith and I will be there whatever the weather has in store for us 🤣
  5. GaryK
    OK, thanks Paul.
  6. GaryK
    Anyone got one of these? Ital PCD 13 x 6J ET16 Any condition considered as long as it's straight. Thanks. Gary
  7. GaryK
    Mine was very similar when I stripped it. I have a T9 5 speed box. Hole had been cut in the tunnel and speedo cable routed under the dash. I got an angle drive made by Speedograph Richfield. https://www.speedograph-richfield.com/shop/angle-drives/rgb1030 A bit of a dog's dinner! Gary
  8. GaryK
    From Rebuilding and Tuning Ford's Kent Crossflow Engine
  9. GaryK
  10. GaryK
  11. GaryK
    I have a set of Caterham belts I replaced with TRS harnesses for sale if you're interested. They worked fine I just wanted something more substantial for track days. Gary
  12. GaryK
    I have a PDF section of the Haynes manual if you're interested. If you PM me your email I'll send it to you.It's 33Mb so won't send in the forum post. Gary
  13. GaryK
    I have the larger 7 inch bowls and replaced my sidelight bulb with a much brighter LED. It does seem to help me be seen as I run with the sidelights on all the time.
  14. GaryK
    I don't appear to be able to edit the original posting 🥴
  15. GaryK
    Thanks all. I've managed to source one from Arch. I'll update my posting.
  16. GaryK
  17. GaryK
    Castle Combe car park today.
  18. GaryK
    I used BGH for my rebuild. Old school and very knowledgeable. Did a great job on my box which runs very sweetly. Would definitely recommend. BGH
  19. GaryK
    The Grange car park, Midhurst this morning. No plates which is strange.
  20. GaryK
    Hi Nigel Have you seen these on ebay? Not sure if they are the right ones but might be worth a look. Half Shafts
  21. GaryK
    I got mine based on comments in the forums. I run them at 18 psi cold and have had no issues on mixed driving over the year and a half since I got them.
  22. GaryK
    I use Rain Expert 3s and can recommend them. From previous posts they are better in wet conditions as the name suggests. I am doing my first track day at Goodwood in July so will see how they behave when pushed
  23. GaryK
    I like that
  24. GaryK
    Made a bracket from L section ali and handle secured in boot. No heater BTW.
  25. GaryK
    BGH put a drain plug in for me. No pictures either but they place it at the bottom of the sandwich plate between the box and tail housing.
×
×
  • Create New...