Jump to content
Click here if you are having website access problems ×

rayjackson1950

Member
 View Profile  See their activity

  • Posts

    102

  • Joined

  • Last visited

 Content Type 

Everything posted by rayjackson1950

  1. rayjackson1950
    Hi Ian Thanks for the info. The build manual is a bt basic on this but your info gives me a bit of a job to look at. And there was me thinking this would be an easy one. Mine is a 5 speed.
  2. rayjackson1950
    Hi Tazio I looked at Demon Tweeks, but with all of theirs I would have to make up an air inlet box to go to the bonnet grille, as I don't fancy pulling the air from the engine bay,
  3. rayjackson1950
    Hi Ian I Have a cut out which is plated, as the piccy below; I have also emailed Caterham and they tell me that there's does fit, I attach the link to it below: https://caterhamparts.co.uk/heater/5380-heater-assembly-s3-sv-csr.html
  4. rayjackson1950
    Hi Stu Yes I have the cut outs plated off, as the piccy. Caterham sell 2 - heaters one of which is labelled S3 which I emailed them and they tell me will fit my car. I have shown the link below; https://caterhamparts.co.uk/heater/5380-heater-assembly-s3-sv-csr.html
  5. rayjackson1950
    If anyone has one, I am interested to make my steering wheel complete.
  6. rayjackson1950
    If anyone has one, I am interested to make my steering wheel complete.
  7. rayjackson1950
    I currently do not have a heater. The Caterham heater looks easy enough to install but isn't cheap, so I wondered if anyone has used an alternative second hand or new one from another car.
  8. rayjackson1950
    My reversing light is permanently on. This suggest to me that it is a faulty switch whci I presume is within the gear box. Any advice would be appreciated to get resolved.
  9. rayjackson1950
    This is what I bought through Amazon. Its enough mesh to do the grille twice. I fixed to the "7" grille with 100mm black cable ties. BESTEU Universal 40" x 13" Car Grill Grille Vent Mesh Aluminum Alloy Front Bumper Rhombic Grill Mesh Sheet
  10. rayjackson1950
    Hi Scott I am thinking of putting mirrors on my 1997 S3 and wondered if you had a photo or 2 you could post?
  11. rayjackson1950
    I nearly bought a car their and was impressed with their knowledge and attitude. If & when I sell mine I would consider them.
×
×
  • Create New...