Hampshire West AR

This is why I like track days that have clear overtaking rules on straights on one side only and with the driver ahead indicating his or her intentions prior to any overtake happening. Nick

Glynh Not heard of that before. I use both an Optimate on my R500D and a Ctek on my Porsche with no issues. The Ctek seems very advanced in its charging regime and I doubt it would upset a 360S electronics. Ctek conditioners are used on all sorts of exotic cars and I have not heard of them causing issues? Nick

Steve Greenland or Steve Greenald?

Only really saw Hedtec and Zamp at the show. Zamp are worth a look, SA2020 for <£500.

I tried on a Hedtec at Autosport but later tried on a Bell GP3 at Merlin Motorsport and preferred the fit so went for one. Nick

Have Caterham committed to a rough price or date? Westfield say £62k and 2024.

Did you sort it?

Found this calculator useful after taking measurements. Just need to make sure your strings are equidistant from the wheel centres and then measure. https://robrobinette.com/DIYAlignmentCalculator.htm Nick

1575mm. https://caterhamcars.com/en/models/explore-the-seven

Look on Car Builder Solutions Website. They have some videos on Youtube that are useful. Switches come in two parts so you may only need the back bit as the front hasn't got much to go wrong. They are known as Savage switches, possibly manufactured by APEM? Nick

I use this in my R500. https://www.opieoils.co.uk/p-147389-comma-motorsport-5w-50-fully-synthetic-racing-car-engine-oil.aspx?variantid=246648

If you read his question he wants to disconnect the wires without cutting, I did similar as I wanted to be able to retrofit the originals if so desired in the future. Looks like he has it sorted anyway. I already had some spare plates to save hacking off the reflectors too.

They have a little barb that needs pushing with a small screwdriver while pulling the wire out of the back of the connector. Nick

Received my new half doors from Steve at YC Plastics. They seem well made but thicker(4mm) than I thought. Any tips on shaping them? Had a quick go with a heat gun but no luck in shaping them. Nick

Think the Cosworth springs are no longer available, Boss Racing upgraded mine to Kent Cam valve spring kit. Nick