Jump to content
Click here if you are having website access problems ×

Damo V

Member
 View Profile  See their activity

  • Posts

    79

  • Joined

  • Last visited

 Content Type 

Everything posted by Damo V

  1. Damo V
    Pm sent
  2. Damo V
    I bought some direct from Oxted (or their retail arm at least) circa 100 quid new in carbon vinyl. i look for used ones for ages as I only wanted them for the spare set of half doors but bought new in the end
  3. Damo V
    Mine was exactly the same as DJ
  4. Damo V
    Mine ran like a pig on light throttle and very rich on idle
  5. Damo V
    I should also mention I have a set of 15s for road and 13 s for track at moment
  6. Damo V
    There is mention of longer studs. If I fit longer studs will the 13's go back on okay for track days? I mean the nuts are "capped" aren't they? The studs won't be too long will they??
  7. Damo V
    I have had one fail at 4k miles on duratec. do you run a cat? My theory is without the cat it suffers more?
  8. Damo V
    Possible? I appreciate it may upset the handling a little but I have 13s for track use, will the 9inch wide CSR wheels fit okay? anyone done it? Presumably the PCD Iis the same?
  9. Damo V
    Caterham harnesses. Caterham list two 6 point harnesses on their website; http://caterhamparts.co.uk/product.php?id_product=239 http://caterhamparts.co.uk/product.php?id_product=4873 One is for the normal car and one is for the SV, how exactly do these harness packs differ please? I have one and need to know how to tell the difference. Is there a difference for the standard 4 point?
  10. Damo V
    Not mine but possible Bonnet with a cut ou on piston heads http://www.pistonheads.com/classifieds/parts-and-plates/parts-and-accessories/caterham/s3-bonnet/4612112
  11. Damo V
    Thank you, I bought one from caterham in the end as I was up against time. Will bear in mind if I need another though. Do you know who makes the factory item? Could get my old one re-cored as a spare.
  12. Damo V
    Who manufactures the standard alloy one and what are the upgrade options?
  13. Damo V
    http://www.turbosport.co.uk/showthread.php?t=155758 http://www.turbosport.co.uk/showthread.php?t=155758
  14. Damo V
    If not battery my money on crank sensor
  15. Damo V

    Half Doors question

    Damo V replied to Mrp's topic in TechTalk

    I just fitted mine last week. front popper and fixing is the push the dot type. You will need longer caps to go through the trim though if they are like mine. i used the measurements above. i then fitted the half hood type popper on the boot cover then a normal (will need long) popper onto the door. i didn't want to drill the side panels as I don't have a tonneau so I bought a couple of arm rests from Oxford and use the to hold the door in place rather than two more poppers. they fit perfect and nice and snug. bought the longer fixings from soft bits although I haven't fitted these yet but everything came from oxted trimming. When I bought arm rests
  16. Damo V
    I managed to leave scuttle trim in place, this worked fine in the end
  17. Damo V
    Yeah genuine caterham carbon, mine is SV. i also have a rubber strip around the leading edge of my scuttle which I notice you don't. Mine had to push down on this also. Again it didn't look possible! i found roughly 1cm of the curves which the poppers are fixed to hangs over the scuttle. i did a whole day at brands last week without drama at all. Mine was also at an angle
  18. Damo V
    I fitted mine last week and I thought the same as you however once I left it to sit for a bit in place, the poppers fitted just fine. I think it had lost shape a little while being sat on top of the wardrobe for a year ;-) I truly believed there was no way the poppers would go on but when I finally did try it properly they went straight on. As you say, trying to pop on then bolt in looked completely wrong.
  19. Damo V
    http://www.gray-nicolls.co.uk/ContactUs.aspx http://www.coolcricket.co.uk/bats/gray-nicolls-gn100-scoop-bat-/prod_128.html
  20. Damo V
    Hi Chris, did you resolve this as I had the exact same problem today!
  21. Damo V

    What key?

    Damo V replied to Midas's topic in TechTalk

    http://www.caterhamparts.co.uk/product.php?id_product=2769 this?
  22. Damo V
    Hi I currently have 2013 SV Supersport R 180. i have 195 45 15 cr500 anthracite 15s at the moment and I am planning on fitting Avon ZZRs 185 55 13s on the anthracite 6 spoke wheels. what do I need to consider please? Balance weights I know need consideration but spring platform? I believe the car will only lower by 10mm. Rear ARB adjust at all? Wheel nuts are the same? (I presume so?) thank you for any suggestions
  23. Damo V
    Interesting details thank you all
  24. Damo V

    S3 Armrests

    Damo V replied to PROBE2's topic in For Sale

    http://www.lotus7.club/membership/special-offers-members/thundersport
  25. Damo V

    S3 Armrests

    Damo V replied to PROBE2's topic in For Sale

    I bought some direct from oxted. Jemma is really helpful. Circa £100 from memory in carbon vinyl
×
×
  • Create New...