Damo V

Pm sent

I bought some direct from Oxted (or their retail arm at least) circa 100 quid new in carbon vinyl. i look for used ones for ages as I only wanted them for the spare set of half doors but bought new in the end

Mine was exactly the same as DJ

Mine ran like a pig on light throttle and very rich on idle

I should also mention I have a set of 15s for road and 13 s for track at moment

There is mention of longer studs. If I fit longer studs will the 13's go back on okay for track days? I mean the nuts are "capped" aren't they? The studs won't be too long will they??

I have had one fail at 4k miles on duratec. do you run a cat? My theory is without the cat it suffers more?

Possible? I appreciate it may upset the handling a little but I have 13s for track use, will the 9inch wide CSR wheels fit okay? anyone done it? Presumably the PCD Iis the same?

Caterham harnesses. Caterham list two 6 point harnesses on their website; http://caterhamparts.co.uk/product.php?id_product=239 http://caterhamparts.co.uk/product.php?id_product=4873 One is for the normal car and one is for the SV, how exactly do these harness packs differ please? I have one and need to know how to tell the difference. Is there a difference for the standard 4 point?

Not mine but possible Bonnet with a cut ou on piston heads http://www.pistonheads.com/classifieds/parts-and-plates/parts-and-accessories/caterham/s3-bonnet/4612112

Thank you, I bought one from caterham in the end as I was up against time. Will bear in mind if I need another though. Do you know who makes the factory item? Could get my old one re-cored as a spare.

Who manufactures the standard alloy one and what are the upgrade options?

http://www.turbosport.co.uk/showthread.php?t=155758 http://www.turbosport.co.uk/showthread.php?t=155758

If not battery my money on crank sensor

I just fitted mine last week. front popper and fixing is the push the dot type. You will need longer caps to go through the trim though if they are like mine. i used the measurements above. i then fitted the half hood type popper on the boot cover then a normal (will need long) popper onto the door. i didn't want to drill the side panels as I don't have a tonneau so I bought a couple of arm rests from Oxford and use the to hold the door in place rather than two more poppers. they fit perfect and nice and snug. bought the longer fixings from soft bits although I haven't fitted these yet but everything came from oxted trimming. When I bought arm rests