riggsbie Posted April 2, 2005 Share Posted April 2, 2005 Hello everyone, I would like to get a custom made exhaust manifold for my 1.6 K series in a Fisher Fury, where can I get a good quality larger bore manifold made ? I would like to stick with a 4 - 2 -1 design...... What is the likely cost of suck a manifold ? Thanks all :) Riggsbie Link to comment Share on other sites More sharing options...
shn7 Posted April 2, 2005 Share Posted April 2, 2005 Suggest a chat with Dave Parris at Powerspeed. Recent bulk buy of complete 4-2-1 systems seems to have worked out very well and I know he made some new designs for engines which hadn't been done before. Contact details here. Might need to have the car for a while to make up a template. Steve. Link to comment Share on other sites More sharing options...
riggsbie Posted April 2, 2005 Author Share Posted April 2, 2005 Cheers Steve..... It's quite handy as I live in SE London so it's not too far...... I guess i should be able to give him my current exhaust manifold and downpipe and he could use that as a template I'll keep you posted on progress..... Thanks again. Paul Link to comment Share on other sites More sharing options...
Bare Posted April 2, 2005 Share Posted April 2, 2005 perhaps try: Hytechexhaust.com... Arguably amoungst the V best systems available.. Prolly serious overkill on a K series Rover .. But it's always good to have a Reference Standard when shopping. Link to comment Share on other sites More sharing options...
davef Posted April 2, 2005 Share Posted April 2, 2005 Second Powerspeed - v pleased with my complete exhaust from the recent bulk buy. Dave Link to comment Share on other sites More sharing options...
martinwhitcher Posted April 2, 2005 Share Posted April 2, 2005 third powerspeed 😬 original bulkbuy! Martin MW 51 CAT Superlight No.171 now know as:Superlight DVA 207 Link to comment Share on other sites More sharing options...
riggsbie Posted April 3, 2005 Author Share Posted April 3, 2005 Looks like Powerspeed will get a call on Monday morning 😬 Thanks for your advice guys...... Link to comment Share on other sites More sharing options...
Peter R Shaw Posted April 4, 2005 Share Posted April 4, 2005 I just had a silencer fitted to my x flow at simpsonraceexhausts.com it looks fantastic ...now saving the dosh for the complete system ... the silencer was £235 fitted and he thinks another 5 to 6 hundred for the pipes and collector....all stainless steel ..all bends keep the same diameter ...not cheap but the dogs wotsits. Road7runner S7S.1.7 X flo here Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now