ian c anderson Posted June 27, 2004 Share Posted June 27, 2004 Hi, My engine takes longer to heat up now and runs at about 75-80 degrees suspect open thermostat. Does my cooling system need bleeding after changing? If so where is the best place to bleed from? Ian Link to comment Share on other sites More sharing options...
Gambo Posted June 27, 2004 Share Posted June 27, 2004 My VX did . I bled it from the top of the radiator. there is a little alen key just undo it, he presto lots of air. 😬 better to blow it up trying, than ware it out! Link to comment Share on other sites More sharing options...
EFA Posted June 27, 2004 Share Posted June 27, 2004 And jack the front of the car up (so expansion tank is higher than engine) as you do it. Leve the expansion tank lid off until the car is right up to temp. Ex Fat Arnie Hauling Less Lard.... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now