Jump to content
Click here if you are having website access problems ×


Peter T

Recommended Posts

My clutch cable is now fouling on my inlet manifold, the threaded sleeve that enters the pedal box is in direct line of my manifold. If i push it all the way in ,it just about clears it, but leaves me with an excess amount of slack in the cable, and therefore cannot move pedal. Do later cars (post 91) have there hole posistioned at an angle, as mine is very square. If someone could post me a picture i would be most gratefull *cool*


'Ready Steady'

Link to comment
Share on other sites



The cable on mine enters the pedal box at an angle.

I have not got any piccies. If the weather is any good on Thursday I will be in the 7 if you would like to have a look.



Su77on Se7ens

Up to my neck in K-series and Duratec engines!


Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Create New...