heptagon Posted April 17 Share Posted April 17 Has anyone fitted arm rests to a car with a full roll cage? I think the standard arm rests will be too long. Has anyone done this? Trimmed the arm rests?? Link to comment Share on other sites More sharing options...
Doggydog33 Posted April 17 Share Posted April 17 You can buy shorter ones from Caterham for an s3 with a full cage. I trimmed mine down but it didn’t end well. I ended up buying the short ones. Regards, Doggydog. 1 Link to comment Share on other sites More sharing options...
heptagon Posted April 18 Author Share Posted April 18 Great, thanks for the reply 👍 Link to comment Share on other sites More sharing options...
heptagon Posted April 18 Author Share Posted April 18 I just messaged Caterham parts and they replied almost immediately but said only one type for S3 cars Link to comment Share on other sites More sharing options...
Doggydog33 Posted April 18 Share Posted April 18 (edited) They’re wrong. Spoke to Oxted and they said they couldn’t sell me any as they were under contact from Caterham. The Caterham parts guy needed some convincing when I phoned them, but he did find them. stock code:300V0125A Kind Regards, dd33 Edited April 18 by Doggydog33 Link to comment Share on other sites More sharing options...
Doggydog33 Posted April 18 Share Posted April 18 To be fair to the parts guys, I think these are quite a new edition to their stock lists. dd33 Link to comment Share on other sites More sharing options...
heptagon Posted April 18 Author Share Posted April 18 Many thanks, Oxted wouldn’t sell armrests to me either when I asked in there last week I’ll go back to CC 👍 Link to comment Share on other sites More sharing options...
7 wonders of the world Posted April 19 Share Posted April 19 Which cage are these for please...? Link to comment Share on other sites More sharing options...
Doggydog33 Posted April 19 Share Posted April 19 The Trackday roll cage. 👍🏻 Link to comment Share on other sites More sharing options...
7 wonders of the world Posted April 20 Share Posted April 20 Academy version Link to comment Share on other sites More sharing options...
Doc007 Posted April 20 Share Posted April 20 I’m quite irritatingly OCD but managed to shorten my existing S3 armrests to fit my Trackday cage in such a way that I find them acceptable. Takes about 10mins per side and uses a short length of IVA trim hammered over the trimmed end. Link to comment Share on other sites More sharing options...
heptagon Posted April 20 Author Share Posted April 20 I managed to pick up a couple of armrests at the Caterham parts sale so will try something similar 👍 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now